Quote:
|
Originally Posted by NemeGuero
You can use a z32 yoke for the driveshaft, it mates the RB tranny
custom downpipe has to be made to clear the steering column
You NEED custom mounts available from Mckinney or Phase2. Ebay has them once in a while as well.
E-fans are a must since you loose the extra space for your clutch fan
I'll think of more later..
|
correct on the Yoke. The downpipe is not the issue in clearing the steering column its actually the elbow . Which most installers notch.
We addressed this issue by making a custom 3 inch elbow/downpipe , to this date no one else I have seen has done this, we also make custom urethane engine mounts, transmission brackets and swaybar brackets and driveshaft. It is a complete kit that is coming out shortly. We feel it will blow the competitions right out of the water.
shameless promotion here for Syko Performance.