Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

jr_ss · 03-27-2017, 05:32 AM

You should be running close to what pressure you want so that gate doesn't have to regulate large amounts of air.

A 13-15lbs spring would work better for your situation. However, 38mm may not be up to the task. I have 44 on my GTX 3076r and I don't have creeping issues. I'll spike past set pressure but it settles within 1 psi to desired. I'm also running a PeakBoost manifold.

With that said, I'd start by changing springs out to see if that helps.

Anyone have any insight to the Spark plugs I requested earlier?

03-27-2017, 05:32 AM	#612
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,412 Trader Rating: (35)	You should be running close to what pressure you want so that gate doesn't have to regulate large amounts of air. A 13-15lbs spring would work better for your situation. However, 38mm may not be up to the task. I have 44 on my GTX 3076r and I don't have creeping issues. I'll spike past set pressure but it settles within 1 psi to desired. I'm also running a PeakBoost manifold. With that said, I'd start by changing springs out to see if that helps. Anyone have any insight to the Spark plugs I requested earlier? __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.