Quote:
Originally Posted by Options13
there is actually a 6lb spring in the gate right now.
if my target boost is 18psi, should i be running a different spring rate?
ALSO, i am using the aem boost control integrated in my ECU with the aem solnoid.
|
Rule of thumb is; double the gate spring pressure is typically the "max" it should run at + or - a few psi. I think you are above that limit and I would bump it up to a 10-12 psi spring to give you some headroom.
jr-ss, I thought you received the info from hanz. Let me reach out to my buddy Ashton to see. Sit tight (send me a PM in afternoon in the mean time to make sure I do not forget).