Quote:
Originally Posted by gsracer
Throwback...
front
18x10 +18
275/35/18
|
You don't happen to have any pictures of the wheel wells do you?
I upgraded from stupid stretch tires to 265/35/18 (Yokohama S-Drives) on an 18x10 wheel with a -3 offset. I have about 1.5 degrees of negative camber up front last I checked. I have yet to get the car corner balanced. Obviously having problems with full lock now, not that I race or anything. But navigating into driveways and parking have become a see saw affair.
I'm not rubbing the front tubs, just the inside where the seam line is, and it looks like it's tugging at the harness now, so going to have to relocate that.
Here are some pictures.
I know some negative camber will fix any of the rubbing issues I'm having such as the passenger side. But I'm also sure a corner balance would fix this as well since I've never gotten one. Always eyeballed it.
Clearly a sledge will help, but I'm wondering if I should do anything more than that?
This damage is only on the passenger side, so far it's cut pretty deep into the tire i'm afraid, so I've parked the car until I figure out what I'm going to do besides break out thor's hammer. Hopefully it didn't compromise the sidewall at all.