Quote:
Originally Posted by dreaMervaj
Is there any way to get the RPMs to work on a KA setup?
|
The cluster gets the RPM feed from the ECU. So check your wiring, or you might have a bad cluster.
Speedo feed comes from an external sensor (in trans for S13/S14 or from ABS controller for S15), then the cluster passes a speed signal to the ECU. The setup you quoted is instructions to connect a different external speed sensor since the CD0 trans doesn't have a speed sensor built in.
Probably need to make a new thread, or chime in on the Small Questions Thread if you're having other issues not related to a CD009 trans swap.