[projectsupra]

Now that all the rust is finally gone, it was time to start the fun stuff.

Went ahead and cut, welded, and hammered the front wheel wells and pinch welds to get the most tire room possible without going trailer fenders.

Cleaned and undercoated the whole underside, then restored and painted the subframes.














Now that some parts are finally going back on the car we moved onto the subframes.
I turned some 6061 to lift the subframe as high as possible, and pressed them in for a nice tight fit.








Afterwards we cleaned up and resealed the old j30 VLSD, turned and pressed in a pair of solid diff mounts to match, and to set the correct pinion angle.