[EVLS14]

Hello block.. She's pretty dirty haha











Headgasket off and Head studs out











Let's turn it over and get this greddy sump off







Sump off, oil pickup etc off







Undo oil pump bolts and remove



Removed main bearing beam, Loosen in the same sequence as the head, Loosen in 2-3 steps











Remove Main caps



Undo rod bolts and remove connecting rods



Carefully remove Pistons and rods as one, lift out crank and remove bearings











Removed oil jets










All looking good bores seem to be good, blocks just a bit dirty. Time for a clean




































Got the block outside the next morning, sprayed some de greeser and got scrubbing



























Didn't turn out too bad, I'll leave the rest up to the machine shop























Block is now at the machine shop getting darton sleeved and head is off getting ported and polished