Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - How To:Add Resistors for Low Impedence/High Impedance Injectors *Approved*

*MELLO*SOS* · 02-13-2007, 12:27 PM

Cool write up!

Here are a couple ideas for your article:

Might want to explain how you determined that 6.8 ohms was the correct resistance for the injectors you're gonna run... Thats easy to add an it will make your article really generic so anyone with any motor and any injectors should be able to figure it out with some easy math.

Also u might want to note the importance of ceramic 10w resistors instead of the little 1/4 watters.

02-13-2007, 12:27 PM	#3
MELLOSOS* LAID OUT Join Date: Mar 2004 Location: LAS VEGAS Age: 42 Posts: 2,015 Trader Rating: (1)	Cool write up! Here are a couple ideas for your article: Might want to explain how you determined that 6.8 ohms was the correct resistance for the injectors you're gonna run... Thats easy to add an it will make your article really generic so anyone with any motor and any injectors should be able to figure it out with some easy math. Also u might want to note the importance of ceramic 10w resistors instead of the little 1/4 watters.