[Super_OK_S13]

since the last update, I made an axle back with a Magna flow muffler.











Here's a clip of it running poorly because of the bad battery issue I was having.



https://www.youtube.com/watch?v=-gRB1g5zBdM

So I bought a new battery for the truck and put the red top optima in the car (the reason the car would crank but not fire).

I made some panels for over the lights with some 1/16th inch ABS sheet.





Pulled it put of the garage under its own power. the white bunny clutch seems to work just fine.





Took the Brides out of the truck and put them back in the car, along with the carpet and factory steering wheel, radio, speakers, door panels, glovebox.



Safety First =)


last piece of the puzzle came in...

















I bought AreoCatch Hood latches to keep it in place =)













I just have to put some RTV inbetween the skeleton and Outter CF part and attach the latches for good..

It is going to get painted at the end of the month by a friend (same friend who painted the bay white). I will be driving it to work and back till then like this to make sure it is running good before paint..

-Jimmy