More from yesterday:
Front wheel test fit (19x9.5 -21 with 20mm spacer and S14 LCA = 19x9.5 -51)
Lowered rear by maxing camber (only slight difference) and adding ~ 1/2 inch preload. It's then wouldn't sit any lower due to the PBM toe rod hitting the subframe.
I can't wait to have Brembos on, these Z32's looks so puny!
Porking
With no patience, I went out and bought some new Godspeed V2 toe arms which are bent for subframe clearance. Installed one side.
