Quote:
Originally Posted by Apex Eight
Are you running an aftermarket fuel pressure regulator? I have an Isis adjustable FPR and I have the same issue with my fuel pressure dropping to zero after the fuel pump primes. This was not an issue with my stock FPR. I did have a guy on another forum tell me that all aftermarket FPRs he has ran do not hold pressure after the fuel pump is done priming though so I don't know what to think.
|
I am running a Tomei FPR. There is pressure still pressure in the system but it doesn't register on the gauge unless the pump is running. If I prime the car and turn it off I can open the filler cap and the system will depressurize. I am going to replace the O-rings anyways as they have dried out from sitting.