Quote:
Originally Posted by LuckyX2
Finally joining the VE swap crew.
Will be running this on my 10.5:1 compression bottom end with e85 and my EFR7163 turbo. Should make for a very responsive 500whp.
Question: I'll be using SR16VE N1 cams in this. With the stock P12 springs and valves, how high can I rev? I'm reading the P12 springs are better than P11 and with the thinner stem valves, that helps revs too. Apparently the N1 cams are profiled for higher revs also, so I'm thinking I might just stay stock and not get the Supertech springs if stock will get me to 8-9k. |
I will be dealing with pretty much the same setup as you Luckyx2; efr7163 twinscroll 10:1 cr pistons with fullrace ts efr manifold. I really love that turbo the response is mindblowing. We shall see if the vvl head mandates a bigger turbo when I push 27 psi of boost at it. I cant wait to drive it see the difference all these mods will give