View Single Post
Old 03-06-2014, 05:37 AM   #29
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Send a message via AIM to fliprayzin240sx
Quote:
Originally Posted by Rb26kouki View Post
can anyone guess whats the offset on these te37 on this s15
specs are
18x9.5 Front
18x10.5 Rear
Quote:
Originally Posted by Rb26kouki View Post
this is my setup
square all around

18x9.5 +12
Tires 235-40-18

future tires
275 35 18 fronts
315 30 18 rears

but want the staggred set
but undecided for +22 or +15
Don't use S15s as reference for S14 fitments since S15s have narrower body lines than S14s. S15 fitments are more like S13s.

As far as fitting that much rubber on 9.5js. I think those are going to be over kill, specially those 315s are 11j-12j width territory.

Quote:
Originally Posted by drgreen View Post
I tried to search and I can't find anyone with a +47 off set wheel. I bought a set of 17x8F +47..17x9R +47. Work Rezax Ver 1

Rubber is 225f 255r

Going onto a 180 with stock fenders.

Haven't had the chance to put them on because doing my 5 lug conv. in a few months when the snow melts....

So I imagine +47 will need spacers so I don't hit coilovers (Cusco Zero2) but then I will be in the fender...

My question is, do you guys think I can just get away with spacers and roll+pull?

Pic request for any 180 that has a +47 work wheel on it...
You wont, those wheels are too high of an offset. You'd need ATLEAST 25mm spacers to make them look decent without having to do much with the fenders (roll is always a good idea).

Quote:
Originally Posted by 93_ProjectS13 View Post
Buying a set of 18x10 +18 for all cornors of my zenki.

Now I've read up and the back should be ok with a 8mm spacer. But the fronts would need a 10mm spacer. Also gonna run 225/40/18 on all 4.

So is the 10mm good? I've read that a 8mm barley clears, why ima grab a 10.

Flip I know you know this!!
All depends on the coilovers/suspension. 18x10 +18 were perfect for my S14 fronts on Topline Aragostas, didn't need any spacers. PM me if you got any other question...


Quote:
Originally Posted by Bladimir View Post
Bro what wheels are those?!
BBS RS, custom re barrel 17x8 +50 to 17x11 +12 all around. And it's your lucky day since he's actually contemplating on selling them for $2300 + sh.

https://www.facebook.com/stephen.knoop.71?fref=ts
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote