|
I also haven't had a chance to go through your write up. But I saw in a youtube video a recommendation to reverse the polarity on the mode door motor by taking it apart. I just had this revelation going through chu's wiring write up for s14.
The jdm fsm has +def/-vent for pin number 7 at the mode door motor. the usdm fsm reads +vent/-def at the same pin. Why is this confusing, because if you flip it around +def/-vent is on pin 8.
I'm sure you probably caught this. But I felt it was worth mentioning. I'd much rather swap two wires instead of taking apart the motor itself.
|