|
"Most parts you need are already in the car, the wiring is the main differnce. I redid the whole harness instead of cutting up the harness in the car. The hardest part of building your own harness is finding the plugs to fit, but these plugs are on a lot of nissans in various places on the interior. So heres a list of parts you WILL need (and donor cars I used)
1. Japanese Digital Climate Control
2. Plug to fit Japanese Digital Climate Control (from 89 Infiniti i-30)
3. Sunload sensor* (from 96 Maxima)
4. Plug for Sunload sensor*
5. Ambeint Air Temp Sensor* (from 96 Maxima)
6. Plug for Ambient Air Temp Sensor*
7. In-Vehicle Air Temp Sensor* (from 96 Maxima)
8. Plug for In-Vehicle Air Temp Sensor*
9. Aspirator* (from 89 Infiniti i-30)
10.Thermo Control Amp (from 96 Maxima)
11. Plug for Thermo Control Amp
12. Thermal Transmiter (from 89 240sx)
13. Plug for Thermal Transmiter
* = Not needed if you do not wish the AUTO function to work. AUTO fuction keeps interior at a selected air temperature.
-Extra Parts you need to make a new harness
14. Plug for Intake Door Motor
15. Plug for Door Mode Motor
16. Plug for Air-Mix Door Motor
17. Plug for Bi-level Door Motor
18. Plug for Blower Motor
You'll most likely find making a new harness to be the easiest way to do this. You will also need a spool of 20ga wire, butt-conectors or solder, a small screwdriver (from eyeglass kit), Dremmel, weatherstriping, and some time.
I will try to post some pics and further directions this week.
"
That is from s14boy on NICO. He never finished his post and the email on NICO, he does not reply to.
|