here is a quick one of me, shitty pic i'll get some better ones..
17x9+20 all around +3 spacer in front, (due to HE's) front spindle set all the way to positive. +8 spacer in rear. Front Camber is maxed out to the full and i didn't do the alignment yet. Seems to fit ok so far, have yet to drive it hard and see if anything hits in the front.. (I had 5mm spacer in front before but it was too much out in my opinion so i machined that hubcentric spacer to a a new 3mm hubcentric spacer!
235/40/17 federals all around.