View Single Post
Old 08-30-2007, 05:06 PM   #147
Slip&Sliden 240
Zilvia Member
 
Slip&Sliden 240's Avatar
 
Join Date: May 2004
Location: Washington
Age: 37
Posts: 237
Trader Rating: (1)
Slip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfectionSlip&Sliden 240 is close to perfection
Quote:
Originally Posted by usdmsilvia View Post
18x10 +12 w/ 20mm spacer makes the offset +12. You fail at math haha
You fail at common sense. Mathmatically -8+20=12, but when you take off set calculations into perspective if a wheel has a offset of +12mm and you space the wheel out 20mm then you are moving the center of the wheel 20mm farther from the hub. Which would make that a -20mm so (+12) + (-20)= -8.

My first post i missread. I thought the wheels were a -8 with a 20mm spacer, not +12 with a 20mm spacer. But if it was -8 with a 20mm spacer then it would be (-8) + (-20) = -28
Slip&Sliden 240 is offline   Reply With Quote