1996 nissan 240sx S14 FSM......"P1320-The ignition signal in the primary circuit is not detected by th ECM during engine cranking or running".
Might have a loose wire in the distributor or the section that reads this in the ECU or ECM as the FSM says, might be burned or not working, try another ECU and drive it for at least a day to make sure the check engine light doesnt come back for that code. or..when i bought a harness once,one wire was messed up on the distributor plug ,a ground i think(the one with many wires not the 2 wire) so i repinned it before installing.so i guess check the 2 clips on the distributor.or a wire leading back to the ECU meaning anywhere in your harness something could be loose or not connected, but then im not sure if the car would even turn on if one of those distributor wires leading to the ECU were messed up.or could be the distributor itself, idk but there you go. you want fries with that? jk.
|