Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Kid Zelda · 12-30-2001, 07:53 PM

Quick write up.

Remove the old lights, nuts are behide the carpet panel. 10mm is the size.

Take them all off, and your under panel.

Then install the underpanel first, then middle panel, then the lights. Make sure to use the black sealent they give you.
Now, all you have to do is wire it up.

You're going to have to cut the wires and connect them to the wires on the lights.

OR ! !
You can give clearcorners.com a holla and ask for the speical plugNPlay harness.

(Edited by Kid Zelda at 7:59 pm on Dec. 30, 2001)

(Edited by Kid Zelda at 8<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>1 pm on Dec. 30, 2001)

12-30-2001, 07:53 PM	#3
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,347 Trader Rating: (0)	Quick write up. Remove the old lights, nuts are behide the carpet panel. 10mm is the size. Take them all off, and your under panel. Then install the underpanel first, then middle panel, then the lights. Make sure to use the black sealent they give you. Now, all you have to do is wire it up. You're going to have to cut the wires and connect them to the wires on the lights. OR ! ! You can give clearcorners.com a holla and ask for the speical plugNPlay harness. (Edited by Kid Zelda at 7:59 pm on Dec. 30, 2001) (Edited by Kid Zelda at 8<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>1 pm on Dec. 30, 2001)