I've been out and away from the car for the past few months, but finally had some time to do some work over the weekend.
I started working on my new manifold set up. all 1.75" 304SS. I was able to get 3 of the 4 driver's side manifold cut, fit and tacked in place. I hope to finish the last runner next weekend and get it all tigged up shortly after that.
Also, i recently got one of my last shipment of materials in for the exhaust. All 304SS as well. Stepping up to 3.5" from the 3" i had on the last setup. I'm going to make a clone of my Trust DD catback, which was 3" to dual 2.5" that opened up to dual 3.5" tips. This time, i'm going 3.5" to dual 3" to dual 3.5" tips.
Here's what i've got:
7' of 3.5" straight polished (4' not pictured, on back order)
5' of 3.5" oval tubing
(4) 3" 90* bends
4' of 3" straight tubing
Vibrant 3.5" race muffler
3.5" stainless flex section
2.5" stainless flex section
(3) 3.5" stainless vband kits
(2) 3" > 3.5" transitions
hopefully more to come in the next few weeks