Quote:
Originally Posted by Zerolift Autolab
In the RPF1 - even with the 18x10.5 +15 and a 50mm over fender
you have about 1" of space between edge of wheel and fender.
So a spacer would be required if you want a flush fit.
with a 30mm over fender it will fit better, but may still need a little bit of
spacer to make it fit flush.
|
Agreed... These wheels are sitting on a S14 in my garage... with a 245 it fits on the stock body with a minor poke... if you don't want a minor poke or want more tire then a pull will set you up perfectly... no need for overs with this setup