Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - s13

91 240 · 01-10-2013, 01:17 PM

I made a couple mounts for a powersteering cooler behind the intercooler.

I was able to finish a 6 point rollbar out of an S&W Racecars 8 point setup (no pics of the door bars).

I made a dump/down turn for my cutout. I'm still waiting on my E cut out.

I also got the majority of my fuel system. Professional Products rails, Bosch 044 pump, Siemens 60lb injectors, Trick Flow 10 and 100 micron filters, Aeromotive 13101 FPR, -8 feed and -6 return.

FPR mounted on the firewall, and notched the pinch weld at the firewall.

i primarily have the pump and pre-filter tucker up behind the passenger rear tire. I'm going to add/build a shield to help protect it.

01-10-2013, 01:17 PM	#2
91 240 Zilvia Member Join Date: Nov 2003 Location: Austin, Tx Age: 45 Posts: 200 Trader Rating: (8)	I made a couple mounts for a powersteering cooler behind the intercooler. I was able to finish a 6 point rollbar out of an S&W Racecars 8 point setup (no pics of the door bars). I made a dump/down turn for my cutout. I'm still waiting on my E cut out. I also got the majority of my fuel system. Professional Products rails, Bosch 044 pump, Siemens 60lb injectors, Trick Flow 10 and 100 micron filters, Aeromotive 13101 FPR, -8 feed and -6 return. FPR mounted on the firewall, and notched the pinch weld at the firewall. i primarily have the pump and pre-filter tucker up behind the passenger rear tire. I'm going to add/build a shield to help protect it. __________________ 91 240sx 03 Pathfinder