Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Coolant Swirl Tank : How To Installment no.2 *Approved*

EAS13 · 03-08-2007, 12:14 PM

Hi guys, question for you.

I have my expansion tank setup exactly as it's laid out in this write-up, with one difference, I'm using a circuit sports reservoir tank.

In case you haven't seen it, it has a nipple on the bottom of the tank under the curved area (you can't see it in this pic, but it's there). This is where I have the overflow(top nipple) from my expansion tank going to.

Instead of allowing the reservoir tank to overflow out of the top nipple, where could I route it to return back into the cooling system? Or should I not do that at all?

Good write-up by the way, +1.

03-08-2007, 12:14 PM	#18
EAS13 Leaky Injector Join Date: Aug 2005 Location: LA Posts: 145 Trader Rating: (0)	Hi guys, question for you. I have my expansion tank setup exactly as it's laid out in this write-up, with one difference, I'm using a circuit sports reservoir tank. In case you haven't seen it, it has a nipple on the bottom of the tank under the curved area (you can't see it in this pic, but it's there). This is where I have the overflow(top nipple) from my expansion tank going to. Instead of allowing the reservoir tank to overflow out of the top nipple, where could I route it to return back into the cooling system? Or should I not do that at all? Good write-up by the way, +1.