|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
|
Thread Tools | Display Modes |
02-21-2006, 11:41 AM
|
#1 |
|
Leaky Injector
Join Date: Jan 2004
Location: carolina beach, nc
Age: 38
Posts: 86
Trader Rating: (0)
 Feedback Score: 0 reviews
 |
n/a sr oil and coolant lines
ok i have an s13 sr20de and i need to run the oil feed and coolant feed lines to the turbo. there are spots on the block that look like they could be drilled and tapped to run the lines to the turbo. They are in the same place as the det blocks but i wanted to make sure before i took a drill to my block. I remember reading something about the sentra sr20 block was able to be tapped in the same locations as the jdm fwd sr20 and they had opil and coolant lines. could anyone help me out on this please?
__________________
if you would like to make a donation towards my car and expensive part needs please contact me at [email protected] |
|
|
| Sponsored Links |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode