300zx brakes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

02-19-2002, 01:23 PM

Are the brake master cylinder on a 89-90 and the 91-up s13 models the same.  The reason I'm asking is because I'm thinking about what I would need to install 300zx brakes.  I'm not sure about the 240sx but I know on a silvia if you have a zenki model it was recomended that you use the brake disk from the 300zx and also the master cylinder from a kouki model silvia.  I'm thinking maybe I'll do this conversion if its not too expensive.  Also do you recommend doing this mod or just get higher performance break pads.  I don't plan on having this car at the tracks everyday  so I don't want to do this If I'm not going to go over the limits of the stock break system..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-19-2002, 01:23 PM	#1
Guest Posts: n/a	Are the brake master cylinder on a 89-90 and the 91-up s13 models the same.  The reason I'm asking is because I'm thinking about what I would need to install 300zx brakes.  I'm not sure about the 240sx but I know on a silvia if you have a zenki model it was recomended that you use the brake disk from the 300zx and also the master cylinder from a kouki model silvia.  I'm thinking maybe I'll do this conversion if its not too expensive.  Also do you recommend doing this mod or just get higher performance break pads.  I don't plan on having this car at the tracks everyday  so I don't want to do this If I'm not going to go over the limits of the stock break system..