clutch noise - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TravisW · 11-19-2006, 06:46 PM

When I press my clutch in, no noise occurs until i rev the engine 2000rpm or more. but when I let off the clutch the noise stops. I was maybe thinking that its throwout bearing but im not sure. If I need to replace my clutch how hard is it to do on a s14. I dont have access to a lift.

YUNG DRIF · 11-19-2006, 07:18 PM

throw out bearing forshure same shit wit my brothas car

koukimonster139 · 11-19-2006, 07:29 PM

if you personally dont have access to a lift Id suggest taking it somewhere

*ManoNegra* · 11-20-2006, 12:35 PM

Dropping the tranny in your backyard is doable but a royal pain in the ass. I rather pull the motor/tranny out but if you just want to drop the tranny here's how:
- drain the fluids
- unplug lower harness
- pull out shifter
- unbolt driveshaft and put it out of the way
- loosen motor mounts so that you can swivel tranny and have access to top bellhouse bolts
- use a long ass 1/2 extension to reach the bellhouse bolts - power tools make life easy
- lower tranny slowly, use a jack, get some help.
- do your dirty deed
- assembly: follow steps in reverse

have fun.

GSXRJJordan · 11-20-2006, 01:15 PM

gogo ManoNegra - I've done it, it works. Buy some ramps/helpers, and it's doable in an afternoon.

TravisW · 11-20-2006, 08:39 PM

thanks i think i'll prolly take it somewhere to have it done, do ya know how much it cost?

11-19-2006, 06:46 PM	#1
TravisW Join Date: Sep 2006 Location: Houston,TX Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	clutch noise When I press my clutch in, no noise occurs until i rev the engine 2000rpm or more. but when I let off the clutch the noise stops. I was maybe thinking that its throwout bearing but im not sure. If I need to replace my clutch how hard is it to do on a s14. I dont have access to a lift.

11-19-2006, 07:18 PM	#2
YUNG DRIF Zilvia Junkie Join Date: Mar 2006 Location: Richmond, CA Age: 36 Posts: 324 Trader Rating: (0) Rides Gallery: YUNG DRIF Feedback Score: 0 reviews	throw out bearing forshure same shit wit my brothas car __________________

11-19-2006, 07:29 PM	#3
koukimonster139 Zilvia FREAK! Join Date: Jan 2006 Location: Birmingham, AL Age: 38 Posts: 1,379 Trader Rating: (0) Feedback Score: 0 reviews	if you personally dont have access to a lift Id suggest taking it somewhere __________________ ho ha ho chi chi

11-20-2006, 01:15 PM	#5
GSXRJJordan Post Whore! Join Date: May 2006 Location: San Diego, CA Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	gogo ManoNegra - I've done it, it works. Buy some ramps/helpers, and it's doable in an afternoon. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-20-2006, 12:35 PM	#4
ManoNegra Guild of Skullduggerous Intent Join Date: Jan 2004 Location: Socal Posts: 7,841 Trader Rating: (48) Feedback Score: 48 reviews	Dropping the tranny in your backyard is doable but a royal pain in the ass. I rather pull the motor/tranny out but if you just want to drop the tranny here's how: - drain the fluids - unplug lower harness - pull out shifter - unbolt driveshaft and put it out of the way - loosen motor mounts so that you can swivel tranny and have access to top bellhouse bolts - use a long ass 1/2 extension to reach the bellhouse bolts - power tools make life easy - lower tranny slowly, use a jack, get some help. - do your dirty deed - assembly: follow steps in reverse have fun.

11-20-2006, 08:39 PM	#6
TravisW Join Date: Sep 2006 Location: Houston,TX Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	thanks i think i'll prolly take it somewhere to have it done, do ya know how much it cost?