Aero Prep - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

motegineon · 11-27-2006, 01:37 AM

ok so i got my whole car sanded down and filled. I got some origin fenders and some aero and i dont know how to prep them lol..do i use sandpaper? scotch brite? What grit sandpaper should i use? also does all of the clear crap they put on have to come off our just scuff it up?

sorry for the nub question but im newer to bodywork, thanks

oh and i searched but didnt find much..

420sx · 11-27-2006, 09:02 AM

thats why you should be on h240 more than here hahah

Dousan_PG · 11-27-2006, 10:02 AM

wet sand it with 400 grit sandpaper
its enough
ive never had any problems.

punxva · 11-27-2006, 10:18 AM

yea just wetsand it until the surface is nice and smooth, and so that gel layer isnt shiny anymore so the primer will adhear to it

LB.Motoring · 11-27-2006, 10:22 AM

yeah wetsand 400, then 800 if you even care... 400 should be good, then clean it....

koukimonster139 · 11-27-2006, 10:27 AM

clean it good after you wetsand with like soap and water. then wax and grease remover then right before its sprayed w/ color use a tack cloth to get the dust and dirt off.

Ritz S14 · 11-27-2006, 10:45 AM

I would do sand with 380 grit. Or you can use a red scotch brite scuff pad.

motegineon · 11-27-2006, 11:18 AM

ok well i went and got some 400 so im just gona wetsand with that, thanks!

11-27-2006, 01:37 AM	#1
motegineon Banned from the Marketplace Join Date: Aug 2005 Location: 神奈川県,日本 Posts: 487 Trader Rating: (2) Feedback Score: 2 reviews	Aero Prep ok so i got my whole car sanded down and filled. I got some origin fenders and some aero and i dont know how to prep them lol..do i use sandpaper? scotch brite? What grit sandpaper should i use? also does all of the clear crap they put on have to come off our just scuff it up? sorry for the nub question but im newer to bodywork, thanks oh and i searched but didnt find much..

11-27-2006, 09:02 AM	#2
420sx Post Whore! Join Date: Jun 2004 Location: Texas Age: 42 Posts: 3,960 Trader Rating: (0) Rides Gallery: 420sx Feedback Score: 0 reviews	thats why you should be on h240 more than here hahah __________________ hydropgrahics! ls1......

11-27-2006, 10:02 AM	#3
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	wet sand it with 400 grit sandpaper its enough ive never had any problems. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

11-27-2006, 10:22 AM	#5
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 38 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	yeah wetsand 400, then 800 if you even care... 400 should be good, then clean it.... __________________ Robby Leuer

11-27-2006, 10:27 AM	#6
koukimonster139 Zilvia FREAK! Join Date: Jan 2006 Location: Birmingham, AL Age: 38 Posts: 1,379 Trader Rating: (0) Feedback Score: 0 reviews	clean it good after you wetsand with like soap and water. then wax and grease remover then right before its sprayed w/ color use a tack cloth to get the dust and dirt off. __________________ ho ha ho chi chi

11-27-2006, 10:45 AM	#7
Ritz S14 Post Whore! Join Date: Jul 2004 Location: C A L I F O R N I A Age: 43 Posts: 3,586 Trader Rating: (0) Feedback Score: 0 reviews	I would do sand with 380 grit. Or you can use a red scotch brite scuff pad.

11-27-2006, 11:18 AM	#8
motegineon Banned from the Marketplace Join Date: Aug 2005 Location: 神奈川県,日本 Posts: 487 Trader Rating: (2) Feedback Score: 2 reviews	ok well i went and got some 400 so im just gona wetsand with that, thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode