S13 P/s sensor wire

[jkgaddis]

I did the wiring on my sr harness the other day and eveything looks good except that i have a connector on the passenger side of the engine bay, towards the front that appears to be the power steering sensor wire (i traced it down to a sensor in the pump discharge line). now, my sr harnes was sent to me chopped to hell, so i couldnt find a plug that went to it. after sorting everything else out i found that i had 2 cut wires left. they are blue/ wht stripe and black. i pull the plug off the ka harness and the wires are brn and black. not a big deal but on the ka harness the brown wire goes to the ecu and on the sr harness the blue/ wht stripe wire bypasses the ecu as if it went into the dash harness. im very confused, im trying to figure this out asap.

any help is appreciated, thanks