removing egr - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

quach · 12-27-2006, 06:03 PM

im trying to replace my egr valve, but i cant seem to get to one of the two bolts that hold it to the intake manifold, and i cant get a good angle to get at the egr tube because of the firewall and all the crap surrounding the valve. does anyone have tips on how to get that thing out of there?

MAGILLA · 01-10-2007, 05:14 PM

I am having the same trouble with the tube but I did get the second bolt off. I used pb blaster first then I removed the egrc valve where its bracket connects to the intake manifold. This gives you just enough room to get the second bolt out and as for the tube I'll let you know.

12-27-2006, 06:03 PM	#1
quach Zilvia Member Join Date: Mar 2005 Location: San Diego, CA Age: 38 Posts: 238 Trader Rating: (1) Feedback Score: 1 reviews	removing egr im trying to replace my egr valve, but i cant seem to get to one of the two bolts that hold it to the intake manifold, and i cant get a good angle to get at the egr tube because of the firewall and all the crap surrounding the valve. does anyone have tips on how to get that thing out of there?

01-10-2007, 05:14 PM	#2
MAGILLA Zilvia Member Join Date: Oct 2005 Location: Atlanta Posts: 208 Trader Rating: (0) Feedback Score: 0 reviews	I am having the same trouble with the tube but I did get the second bolt off. I used pb blaster first then I removed the egrc valve where its bracket connects to the intake manifold. This gives you just enough room to get the second bolt out and as for the tube I'll let you know. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode