Exhaust Smacking Floorboard Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

GR8WHITE · 02-22-2007, 07:47 PM

Just wanted to know if anyone else has had this same problem. I have a s13 coupe with a blacktop sr20 with greddy turbo elbow, 3" flex downpipe, cat delete pipe, and apexi noir exhaust. The problem I am having is the exhaust is hitting on the floorboard where the drivers side right rear seat stud is, the exhaust is literally less than 1/2 an inch away from the body. I bought the nismo exhaust hangers and it seems like it made it worse by keeping the exhaust closer to the bottom of the car. Does anyone know what I can do to remedy this? Maybe try to bend the hangers? Thanks

McRussellPants · 02-22-2007, 08:30 PM

Mine used to hit up by the pedals.

shrug.

I got a new motor and it doesn't do it anymore.

GSXRJJordan · 02-22-2007, 09:39 PM

Hey, I've got the same exhaust, and yeah right behind the first muffler I noticed that I'm hitting a little bit - basically whenever I swing a hard right, or slide through a right hand drift, it hits the floorboard. I only noticed it happening after I actually attached the hanger right by the rear axle.

I'm guessing it's the hanger at the very back that angles the exhaust a little bit. I'm not too worried about it, I've got bigger issues (car's low enough to scrape the downpipe, muffler, and piping, and it's all pretty tucked). Nice exhaust though, huh?

vw_nissan · 02-22-2007, 10:25 PM

So I am not the only one with this problem then.....new exhaust hangers don't help huh......

The exhaust hit the seats stud like crazy especially during rainy days....the car will just be idling at the light, but the exhaust rattles like an exhaust hanger is missing.....drives me nuts.....

I have an Apex N1 btw.

gonzoes14k · 02-22-2007, 10:28 PM

i had this issues with mine, i put new hangers in rear and it semi-fixed the problem, but under as stated when turning hard or decel i can hear it.

AwhiteS13 · 02-23-2007, 07:34 AM

I had the same problem with the N1, Just cut the seat bolt and you'll be fine

TheWolf · 02-23-2007, 07:40 AM

I had a problem with mine bouncing off the driveshaft 1pc and sounding like it was hitting under the car. Sure it's not the shaft?

vw_nissan · 02-23-2007, 08:21 AM

Quote:

Originally Posted by AwhiteS13

I had the same problem with the N1, Just cut the seat bolt and you'll be fine

But it's not the bolt that is coming out right? It's the bolt seating that is coming out, but if you cut it, you wouldn't be able to put new bolts in anymore, no?

g6civcx · 02-23-2007, 08:34 AM

New motor mounts and gearbox mount.

-=RS13=- · 02-23-2007, 10:17 AM

BFH to the floorboards

GR8WHITE · 02-23-2007, 02:00 PM

I HAVE THE NISMO MOTOR MOUNTS AND TRANNY MOUNT, AND I HAVE ALREADY CUT THE BOLT OFF. IT ESPECIALLY HITS WHEN THE ROAD STARTS GETTING A LITTLE BUMPY AND WHEN I DRIVE THE CANYON HOME IT HITS WHEN I MAKE RIGHT TURNS. MAYBE I AM GOIN TO TRY AND BEND THE EXHAUST HANGERS A LITTLE BIT, I ALSO HAVE TEIN SUPER DRIFT COILOVERS AND THEY ARE SUPER STIFF SO I AM SURE THAT DOES NOT HELP. BTW THE NOIR EXHAUST IS AWESOME! SORRY ABOUT THE CAPS

GR8WHITE · 02-27-2007, 07:25 PM

allright what i ended up doing is loosening the exhaust from the turbo elbow to the beginning of the apexi exhaust and there was play in the downpipe and cat delete pipe bolts, where the nuts and bolts attach the holes for the bolts on the pipes were much larger than the diameter of the bolts so i loosened it up and moved the exhaust in the direction away from the floorboard and it fixed the banging by about 98%

Jesses240 · 02-27-2007, 07:29 PM

I was gonna say take it all apart and put it back together....

but you already did that

:-)

02-22-2007, 07:47 PM	#1
GR8WHITE Leaky Injector Join Date: May 2006 Location: CA Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	Exhaust Smacking Floorboard Help Just wanted to know if anyone else has had this same problem. I have a s13 coupe with a blacktop sr20 with greddy turbo elbow, 3" flex downpipe, cat delete pipe, and apexi noir exhaust. The problem I am having is the exhaust is hitting on the floorboard where the drivers side right rear seat stud is, the exhaust is literally less than 1/2 an inch away from the body. I bought the nismo exhaust hangers and it seems like it made it worse by keeping the exhaust closer to the bottom of the car. Does anyone know what I can do to remedy this? Maybe try to bend the hangers? Thanks

02-22-2007, 09:39 PM	#3
GSXRJJordan Post Whore! Join Date: May 2006 Location: San Diego, CA Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	Hey, I've got the same exhaust, and yeah right behind the first muffler I noticed that I'm hitting a little bit - basically whenever I swing a hard right, or slide through a right hand drift, it hits the floorboard. I only noticed it happening after I actually attached the hanger right by the rear axle. I'm guessing it's the hanger at the very back that angles the exhaust a little bit. I'm not too worried about it, I've got bigger issues (car's low enough to scrape the downpipe, muffler, and piping, and it's all pretty tucked). Nice exhaust though, huh? __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

02-22-2007, 10:28 PM	#5
gonzoes14k Zilvia Addict Join Date: Nov 2003 Location: Lynchburg,VA Age: 42 Posts: 626 Trader Rating: (1) Feedback Score: 1 reviews	i had this issues with mine, i put new hangers in rear and it semi-fixed the problem, but under as stated when turning hard or decel i can hear it. __________________ "To establish the sports car, you have to race it," Zora Arkus-Duntov

02-23-2007, 07:40 AM	#7
TheWolf Zilvia FREAK! Join Date: Aug 2005 Location: Orange Park, FL (Jax) Posts: 1,468 Trader Rating: (0) Feedback Score: 0 reviews	I had a problem with mine bouncing off the driveshaft 1pc and sounding like it was hitting under the car. Sure it's not the shaft? __________________ Eye on the Prize

02-23-2007, 10:17 AM	#10
-=RS13=- Leaky Injector Join Date: Jan 2004 Location: Canada Age: 38 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	BFH to the floorboards __________________ Built by myself, Not by a shop and defintaly not bought. FTUW

02-22-2007, 08:30 PM	#2
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	Mine used to hit up by the pedals. shrug. I got a new motor and it doesn't do it anymore.

02-22-2007, 10:25 PM	#4
vw_nissan Zilvia Member Join Date: Nov 2005 Location: Nowhere Age: 53 Posts: 163 Trader Rating: (0) Feedback Score: 0 reviews	So I am not the only one with this problem then.....new exhaust hangers don't help huh...... The exhaust hit the seats stud like crazy especially during rainy days....the car will just be idling at the light, but the exhaust rattles like an exhaust hanger is missing.....drives me nuts..... I have an Apex N1 btw.

02-23-2007, 07:34 AM	#6
AwhiteS13 Join Date: Mar 2006 Location: Iowa Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	I had the same problem with the N1, Just cut the seat bolt and you'll be fine

02-23-2007, 08:34 AM	#9
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	New motor mounts and gearbox mount.

02-23-2007, 02:00 PM	#11
GR8WHITE Leaky Injector Join Date: May 2006 Location: CA Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	I HAVE THE NISMO MOTOR MOUNTS AND TRANNY MOUNT, AND I HAVE ALREADY CUT THE BOLT OFF. IT ESPECIALLY HITS WHEN THE ROAD STARTS GETTING A LITTLE BUMPY AND WHEN I DRIVE THE CANYON HOME IT HITS WHEN I MAKE RIGHT TURNS. MAYBE I AM GOIN TO TRY AND BEND THE EXHAUST HANGERS A LITTLE BIT, I ALSO HAVE TEIN SUPER DRIFT COILOVERS AND THEY ARE SUPER STIFF SO I AM SURE THAT DOES NOT HELP. BTW THE NOIR EXHAUST IS AWESOME! SORRY ABOUT THE CAPS

02-27-2007, 07:25 PM	#12
GR8WHITE Leaky Injector Join Date: May 2006 Location: CA Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	allright what i ended up doing is loosening the exhaust from the turbo elbow to the beginning of the apexi exhaust and there was play in the downpipe and cat delete pipe bolts, where the nuts and bolts attach the holes for the bolts on the pipes were much larger than the diameter of the bolts so i loosened it up and moved the exhaust in the direction away from the floorboard and it fixed the banging by about 98%

02-27-2007, 07:29 PM	#13
Jesses240 Leaky Injector Join Date: Aug 2006 Location: Oregon Age: 40 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	I was gonna say take it all apart and put it back together.... but you already did that :-) __________________ --Jesse R33

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode