Greddy Intercooler install help? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ctopher06 · 04-12-2007, 07:46 PM

im trying to install my newly acquired Greddy Intercooler setup. the core dimensions are 34" longx11"tallx3"wide. i was trying to slide it up into my bumper and there is not enough room due to part of the bumper being in the way. i was curious as to what the best way is to cut this section out or bend it out of the way. this Greddy kit is used and supposed to be a direct setup for an s14. i have a 95' 240sx. here are some pics with the little lip that is in the way highlighted.

any help would be great!

thanks...

04-12-2007, 07:46 PM	#1
ctopher06 Join Date: Mar 2007 Location: Des Moines Ia Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Greddy Intercooler install help? im trying to install my newly acquired Greddy Intercooler setup. the core dimensions are 34" longx11"tallx3"wide. i was trying to slide it up into my bumper and there is not enough room due to part of the bumper being in the way. i was curious as to what the best way is to cut this section out or bend it out of the way. this Greddy kit is used and supposed to be a direct setup for an s14. i have a 95' 240sx. here are some pics with the little lip that is in the way highlighted. any help would be great! thanks... __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode