S13 digital climate control - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JRwerks · 03-23-2008, 10:55 AM

ok well ive searched and found and printed all the wiring diagrams for the digital climate control and iono what i did wrong did everything that the diagrams said to do but some reason when i connect the 6pin plugs together the air comes on and keeps blowing wont shut off.... de-pinned what i needed to and pinned it where its suppose to be at...

Anyone suggest a certain write-up???
appreciate the help everyone...

brn2slid · 03-23-2008, 11:55 AM

you need the blower motor speed sensor, you can not use your factory one... it needs to be swapped out... at least thats what it sounds like

ki_JDM_ds · 03-23-2008, 12:01 PM

Yea it sounds like your blower motor speed sensor might be grounded to the ac line inside your air box.

are you just running one blue relay on the harness?

JRwerks · 03-23-2008, 12:10 PM

i guess im running juss one blue relay thats the one connected to the jdm harness and my car is a 89' it comes with no a/c..

is the blower motor speed sensor the silver block thing that gets connected to the black thing behind the glove box??

ki_JDM_ds · 03-23-2008, 12:32 PM

Yea thats what it is (silver thing)...

try plugging both relays in.

there is a thread out there its a post by broadfield he explains what he did to stop the blower motor problem. it helped me but i cannot find the link

driftenthusiast · 03-23-2008, 02:45 PM

Quote:

Originally Posted by silverman182

ok well ive searched and found and printed all the wiring diagrams for the digital climate control and iono what i did wrong did everything that the diagrams said to do but some reason when i connect the 6pin plugs together the air comes on and keeps blowing wont shut off.... de-pinned what i needed to and pinned it where its suppose to be at...

Anyone suggest a certain write-up???
appreciate the help everyone...

Use the search.
http://www.zilvia.net/f/showthread.p...limate+control

JRwerks · 03-23-2008, 04:58 PM

Omg thanks "DRIFTENTHUSIAST" this write up really helped me out gets rid of all the confusing sutuff this should be the only write up for the DCC lol.

JRwerks · 04-02-2008, 08:02 PM

i completed my dcc about a week ago all i need to do is make a levridge or some connector of some type to open and close the heat/cold anyone have a method of what they used or? let me know all help is appreciated thanks.

03-23-2008, 10:55 AM	#1
JRwerks Zilvia FREAK! Join Date: Mar 2007 Location: SOCAL Posts: 1,200 Trader Rating: (55) Feedback Score: 55 reviews	S13 digital climate control ok well ive searched and found and printed all the wiring diagrams for the digital climate control and iono what i did wrong did everything that the diagrams said to do but some reason when i connect the 6pin plugs together the air comes on and keeps blowing wont shut off.... de-pinned what i needed to and pinned it where its suppose to be at... Anyone suggest a certain write-up??? appreciate the help everyone...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-23-2008, 11:55 AM	#2
brn2slid Nissanaholic! Join Date: Jan 2007 Location: Kansas Posts: 1,841 Trader Rating: (17) Feedback Score: 17 reviews	you need the blower motor speed sensor, you can not use your factory one... it needs to be swapped out... at least thats what it sounds like

03-23-2008, 12:01 PM	#3
ki_JDM_ds Zilvia FREAK! Join Date: Nov 2006 Location: Wichita, Kansas Age: 37 Posts: 1,085 Trader Rating: (56) Feedback Score: 56 reviews	Yea it sounds like your blower motor speed sensor might be grounded to the ac line inside your air box. are you just running one blue relay on the harness?

03-23-2008, 12:10 PM	#4
JRwerks Zilvia FREAK! Join Date: Mar 2007 Location: SOCAL Posts: 1,200 Trader Rating: (55) Feedback Score: 55 reviews	i guess im running juss one blue relay thats the one connected to the jdm harness and my car is a 89' it comes with no a/c.. is the blower motor speed sensor the silver block thing that gets connected to the black thing behind the glove box??

03-23-2008, 12:32 PM	#5
ki_JDM_ds Zilvia FREAK! Join Date: Nov 2006 Location: Wichita, Kansas Age: 37 Posts: 1,085 Trader Rating: (56) Feedback Score: 56 reviews	Yea thats what it is (silver thing)... try plugging both relays in. there is a thread out there its a post by broadfield he explains what he did to stop the blower motor problem. it helped me but i cannot find the link

03-23-2008, 04:58 PM	#7
JRwerks Zilvia FREAK! Join Date: Mar 2007 Location: SOCAL Posts: 1,200 Trader Rating: (55) Feedback Score: 55 reviews	Omg thanks "DRIFTENTHUSIAST" this write up really helped me out gets rid of all the confusing sutuff this should be the only write up for the DCC lol.

04-02-2008, 08:02 PM	#8
JRwerks Zilvia FREAK! Join Date: Mar 2007 Location: SOCAL Posts: 1,200 Trader Rating: (55) Feedback Score: 55 reviews	i completed my dcc about a week ago all i need to do is make a levridge or some connector of some type to open and close the heat/cold anyone have a method of what they used or? let me know all help is appreciated thanks.