Introduction - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

insanitykouki · 04-06-2008, 05:27 PM

Hello everyone, nice to meet you all! My name is Griffin and I have a 1998 Nissan 240SX SE. My mod list is fairly extensive from rims to cams and lightweight drivetrain goodies to suspension arms.

I decided to KA-T for a few reasons but mostly because I didnt want to do what everyone else is doing

. I installed the full turbo kit this winter and my power goals are mild with approximately 300-350whp.

I do have a question though, I figured I would ask while introducing myself along with pictures

. The car wont rev over 3000rpm. From what I have gathered is this is generally a MAF problem. I swapped MAFs (Z32) and cleaned both MAFs. Additionally, I checked the wiring multiple times and everything is fine. I have an EFI ecu and I am almost CERTAIN the program is wrong and needs to be reflashed. Everything else is plugged in perfect. I did not remove the motor or anything, just took off intake and exhaust replaced it all respectively. Thoughts?

List of mods, not complete because I have a terrible memory!
Go fast mods
JWT Cams
T3/T4 50trim 63a/r turbo, JGS intercooler piping, Perrin BOV
X02 racing intercooler (Ebay lol)
exhaust
JGS downpipe and trust downpipe, megan test pipe, blitz "cat"back
fuel
550cc deutchwerk injectors, walbro fuel pump
tranny
fidanza flywheel, ACT clutch, enjukuracing driveshaft, kaaz LSD, unorthodox racing underdrive pulley, B&M short shifter
looks
350z powdercoated bronze rims with falken azenis
suspension
tein tie rods, gr2 shocks, tein s-tech springs, battle version RUCAs
electrical
EFI ECU, z32 maf, relocated battery, AEM tru-boost, alpine 6.5 rear and front, alpine deck, 2 12" orion subs, 1500w amp, apexi S-AFC II (letting a friend use for now unless i cant get my ECU crap to work)

I would post more pictures but it looks like a standard black kouki with the bronze 350 rims. Heres the motor, i guess its the only thing that is visually different

drft_n_s13 · 04-06-2008, 05:29 PM

sup!!! welcummz, nice setup

racepar1 · 04-06-2008, 05:42 PM

Welcome, but there IS an introduction thread for you to post this in. Don't be surprised when this thread is closed.

**Phlip** · 04-06-2008, 05:49 PM

Welcome, Griffin... Do this here:
http://www.zilvia.net/f/showthread.php?t=96924

04-06-2008, 05:27 PM	#1
insanitykouki Join Date: Apr 2008 Location: Michigan Age: 40 Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	Introduction Hello everyone, nice to meet you all! My name is Griffin and I have a 1998 Nissan 240SX SE. My mod list is fairly extensive from rims to cams and lightweight drivetrain goodies to suspension arms. I decided to KA-T for a few reasons but mostly because I didnt want to do what everyone else is doing . I installed the full turbo kit this winter and my power goals are mild with approximately 300-350whp. I do have a question though, I figured I would ask while introducing myself along with pictures . The car wont rev over 3000rpm. From what I have gathered is this is generally a MAF problem. I swapped MAFs (Z32) and cleaned both MAFs. Additionally, I checked the wiring multiple times and everything is fine. I have an EFI ecu and I am almost CERTAIN the program is wrong and needs to be reflashed. Everything else is plugged in perfect. I did not remove the motor or anything, just took off intake and exhaust replaced it all respectively. Thoughts? List of mods, not complete because I have a terrible memory! Go fast mods JWT Cams T3/T4 50trim 63a/r turbo, JGS intercooler piping, Perrin BOV X02 racing intercooler (Ebay lol) exhaust JGS downpipe and trust downpipe, megan test pipe, blitz "cat"back fuel 550cc deutchwerk injectors, walbro fuel pump tranny fidanza flywheel, ACT clutch, enjukuracing driveshaft, kaaz LSD, unorthodox racing underdrive pulley, B&M short shifter looks 350z powdercoated bronze rims with falken azenis suspension tein tie rods, gr2 shocks, tein s-tech springs, battle version RUCAs electrical EFI ECU, z32 maf, relocated battery, AEM tru-boost, alpine 6.5 rear and front, alpine deck, 2 12" orion subs, 1500w amp, apexi S-AFC II (letting a friend use for now unless i cant get my ECU crap to work) I would post more pictures but it looks like a standard black kouki with the bronze 350 rims. Heres the motor, i guess its the only thing that is visually different

04-06-2008, 05:49 PM	#4
Phlip Yes, I look like that Join Date: Mar 2002 Location: In my supervillain's lair Posts: 27,980 Trader Rating: (19) Rides Gallery: Phlip Feedback Score: 19 reviews	Welcome, Griffin... Do this here: http://www.zilvia.net/f/showthread.php?t=96924 __________________ Weirdo And I write too!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-06-2008, 05:29 PM	#2
drft_n_s13 Leaky Injector Join Date: Jun 2007 Location: Cali and Texas! Age: 36 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	sup!!! welcummz, nice setup

04-06-2008, 05:42 PM	#3
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Welcome, but there IS an introduction thread for you to post this in. Don't be surprised when this thread is closed.