Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-25-2002, 09:45 PM   #1
Ryan of Velocity
Zilvia.net Advertiser
 
Join Date: Sep 2001
Location: Indianapolis
Age: 46
Posts: 223
Trader Rating: (0)
Ryan of Velocity is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via Yahoo to Ryan of Velocity
Hmm, if you're going it on jackstands I would suggest tying the tranny up so it doesn't fall on your head.  You can just open your doors and run a rope through the car and then under the car and under the tranny and tie it so you can lay under neath it and wiggle it back and forth.

If the tranny hasn't been out in a while the splines aren't going to let the shaft slide out real easy.  Basically you just need to twist it back and forth and pull from underneath the car and see if you can get someone to pry at the same time.

It's a pain in the ass but it'll come off!  Just keep working it.  Oh and don't worry too much about yanking the shit out of it.  Just yank like a mofo and it'll budge.
__________________

Works Yamaguchi
www.worksyamaguchi.com
8253 Indy Lane
Indianapolis, IN 46214
(317) 273-8809
Ryan of Velocity is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net