clutch pedal sticking? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cleanest92 · 05-23-2008, 11:02 AM

alright i got a 92 coupe and put a new clutch kit, master cylinder, slave cylinder, spring on the pedal, flywheel in it and its still sticking to the floor when i fast shift it. theres no air in the lines or anything. anyone got an idea for me?

xsparc · 05-23-2008, 12:01 PM

hmmm... maybe its not adjusted all the way out? where does your clutch disenguage? top, middle, floor? when it sticks, is the clutch disenguaged?
I had a problem where the fork and piviot were all gummed up so it would sometimes stick like that.

Id say check the adjustment, fork and piviot.

g6civcx · 05-23-2008, 12:38 PM

Also check the pedal return spring and the pedal bracket itself. Sometimes the bracket cracks and makes the pedal go sideway = stick.

*exitspeed* · 05-23-2008, 12:42 PM

Moved to tech section...

infinitexsound · 05-23-2008, 07:23 PM

I still think u have a faulty slave.... or not enough fluid.... might want to check if the slave cylinder is engaging and disengaging...under the car.... have a friend press the clutch pedal for u...

cleanest92 · 05-26-2008, 01:16 PM

well it disengages towards the top and it sticks when its at high rpms. but if i dont get on the gas right away then it takes a second for it to pop back out. the slave works fine. i have no idea what could be wrong i just put a new line on it because the one had a kink in it. the guy im friends with that owns a trans shop says that the master cyl could be bad and to get one from the dealer? any other ideas for me.

05-23-2008, 11:02 AM	#1
cleanest92 Join Date: May 2008 Location: janesville, wi Age: 38 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	clutch pedal sticking? alright i got a 92 coupe and put a new clutch kit, master cylinder, slave cylinder, spring on the pedal, flywheel in it and its still sticking to the floor when i fast shift it. theres no air in the lines or anything. anyone got an idea for me?

05-23-2008, 12:01 PM	#2
xsparc Zilvia Junkie Join Date: Dec 2002 Location: san diego area - esco Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	hmmm... maybe its not adjusted all the way out? where does your clutch disenguage? top, middle, floor? when it sticks, is the clutch disenguaged? I had a problem where the fork and piviot were all gummed up so it would sometimes stick like that. Id say check the adjustment, fork and piviot. __________________ No... no one stole my interior... its safely in my garage...

05-23-2008, 12:42 PM	#4
exitspeed aWingThing.com Join Date: Mar 2003 Location: Milwaukee, WI Age: 45 Posts: 20,900 Trader Rating: (1) Feedback Score: 1 reviews	Moved to tech section... __________________ What I do for a living...www.mhrussell.com

05-23-2008, 07:23 PM	#5
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 42 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	I still think u have a faulty slave.... or not enough fluid.... might want to check if the slave cylinder is engaging and disengaging...under the car.... have a friend press the clutch pedal for u... __________________ S14 TrackSlut coming to a raceway near you... 510 TimeAttack on its way...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-23-2008, 12:38 PM	#3
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Also check the pedal return spring and the pedal bracket itself. Sometimes the bracket cracks and makes the pedal go sideway = stick.

05-26-2008, 01:16 PM	#6
cleanest92 Join Date: May 2008 Location: janesville, wi Age: 38 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	well it disengages towards the top and it sticks when its at high rpms. but if i dont get on the gas right away then it takes a second for it to pop back out. the slave works fine. i have no idea what could be wrong i just put a new line on it because the one had a kink in it. the guy im friends with that owns a trans shop says that the master cyl could be bad and to get one from the dealer? any other ideas for me.