Help!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ocska04 · 06-03-2008, 12:09 AM

OK peeps so i was doing my intercooler piping and putting my new greddy intake manifold and now that i have it all hooed up i encountered this lil problem i dont know where this thick line goes so when i try starting my car it cranks over all and then just dies

http://s109.photobucket.com/albums/n...problem001.jpg

Forge_55b · 06-03-2008, 03:26 AM

have you tried capping that off, cause im guessin its a vacuum line that the greddy manifold doesn't have outlet for or what not

luvsr20 · 06-03-2008, 05:11 AM

I would also agree to cap it off if there is not an extra nipple to hook it up too. But u probably need a vacuum source....

Markovich · 06-03-2008, 06:40 AM

fuel return line
make sure you get that hooked up or a major fire can occure

later

SleeperSx · 06-03-2008, 06:49 AM

Quote:

Originally Posted by Markovich

fuel return line
make sure you get that hooked up or a major fire can occure

later

Agree fuel return line!! How do you miss this?

ocska04 · 06-03-2008, 03:33 PM

ok so this is kinda a dumb question but where do i hook it up to?

xsparc · 06-03-2008, 03:37 PM

well to start id bee looking at where you are spilling fuel from since thats the return line. try looking near the FPR

stillen · 06-03-2008, 03:56 PM

Goto this link, at the bottom of the page there are all the instructions clearly in pdf format. http://www.greddy.com/tech/

All outlets of the intake manifold for the greddy should be connected to something and all the hoses that came the greddy manifold should be used. Nothing should be capped.

06-03-2008, 12:09 AM	#1
ocska04 Zilvia Member Join Date: Mar 2005 Location: L.A Posts: 151 Trader Rating: (0) Feedback Score: 0 reviews	Help!!!!! OK peeps so i was doing my intercooler piping and putting my new greddy intake manifold and now that i have it all hooed up i encountered this lil problem i dont know where this thick line goes so when i try starting my car it cranks over all and then just dies http://s109.photobucket.com/albums/n...problem001.jpg

06-03-2008, 06:40 AM	#4
Markovich Leaky Injector Join Date: Apr 2006 Location: lancaster,pa Posts: 96 Trader Rating: (0) Feedback Score: 0 reviews	fuel return line make sure you get that hooked up or a major fire can occure later __________________ 7-mount sr20det evo3 16g in a 90 240sx coupe yes its a nisclipse bitch

06-03-2008, 03:37 PM	#7
xsparc Zilvia Junkie Join Date: Dec 2002 Location: san diego area - esco Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	well to start id bee looking at where you are spilling fuel from since thats the return line. try looking near the FPR __________________ No... no one stole my interior... its safely in my garage...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-03-2008, 03:26 AM	#2
Forge_55b Zilvia Junkie Join Date: Jun 2007 Location: OC Age: 43 Posts: 414 Trader Rating: (2) Feedback Score: 2 reviews	have you tried capping that off, cause im guessin its a vacuum line that the greddy manifold doesn't have outlet for or what not

06-03-2008, 05:11 AM	#3
luvsr20 Zilvia Junkie Join Date: Jan 2004 Location: Illinois Age: 40 Posts: 333 Trader Rating: (1) Feedback Score: 1 reviews	I would also agree to cap it off if there is not an extra nipple to hook it up too. But u probably need a vacuum source....

06-03-2008, 03:33 PM	#6
ocska04 Zilvia Member Join Date: Mar 2005 Location: L.A Posts: 151 Trader Rating: (0) Feedback Score: 0 reviews	ok so this is kinda a dumb question but where do i hook it up to?

06-03-2008, 03:56 PM	#8
stillen Leaky Injector Join Date: Dec 2006 Location: USA Posts: 60 Trader Rating: (0) Feedback Score: 0 reviews	Goto this link, at the bottom of the page there are all the instructions clearly in pdf format. http://www.greddy.com/tech/ All outlets of the intake manifold for the greddy should be connected to something and all the hoses that came the greddy manifold should be used. Nothing should be capped.