Another, "My SR wont start thread" - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Tearlessj · 06-15-2008, 05:28 PM

Well I installed my SR, its cranks but wont spark. I get fuel but no spark. I just replaced the CAS cause the one I recieved was busted. Ok, so I ran the multimeter on the ECU side of the ignitor clip (on the wiring harness). I got 12v on all the pins constantly. Even when I was NOT cranking it. Plugged in the ignitor, cranked the motor, checked the pins on the 'out" side of the ignitor and nothing. Any ideas?

06-15-2008, 05:28 PM	#1
Tearlessj Nissanaholic! Join Date: Feb 2007 Location: Memphis Age: 33 Posts: 1,907 Trader Rating: (6) Feedback Score: 6 reviews	Another, "My SR wont start thread" Well I installed my SR, its cranks but wont spark. I get fuel but no spark. I just replaced the CAS cause the one I recieved was busted. Ok, so I ran the multimeter on the ECU side of the ignitor clip (on the wiring harness). I got 12v on all the pins constantly. Even when I was NOT cranking it. Plugged in the ignitor, cranked the motor, checked the pins on the 'out" side of the ignitor and nothing. Any ideas? __________________ Nagasaki Motors Friends help you move. Real friends help you move bodies.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode