SAFC+set ignition help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blks14z · 09-19-2008, 08:49 PM

I want to re-adjust my ignition timing but the problem is that i have a SAFC installed. When i unplugged the throttle body sensor, my car would idle at 1,100 rpm. ( This is after when the car is fully warmed up). On the SAFC, it says that the throttle is @ 100%. I tried adjusting the idle screw but it didn't do nothing. Any ideas or proper ways to do it??? BTW this is on a 1996 240sx.

09-19-2008, 08:49 PM	#1
blks14z Join Date: Oct 2007 Location: MN Age: 38 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	SAFC+set ignition help I want to re-adjust my ignition timing but the problem is that i have a SAFC installed. When i unplugged the throttle body sensor, my car would idle at 1,100 rpm. ( This is after when the car is fully warmed up). On the SAFC, it says that the throttle is @ 100%. I tried adjusting the idle screw but it didn't do nothing. Any ideas or proper ways to do it??? BTW this is on a 1996 240sx.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode