Wiring harness replacement connectors - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bb4_96 · 07-29-2010, 06:29 AM

My weeks of being a persistent pita for several companies around the world have brought me to a point now where I can start offering some of my findings. If you've read any of my posts I've been hunting for factory nissan connectors for a while. I've made a couple good strides into the market now and am poised to start making purchases.

So my question is this. Until I ramp up my efforts into full on made to order/custom tailored harnesses, is there a market for BNIB factory replacement connectors? No more busted tabs, mangled/melted housings, loose contacts. An opportunity to repin and relengthen your harness without soldering.

If theres enough interest I'll start stocking to sell soon. If not I can hold off till I find sources for the rest of my operation.

Also I can provide a used version of just about any connector on most cars, don't know if that's useful either. I'm hoping i can provide full range of components from used to new and new/used eg used good housing with some new terminals.

Let me know what is the consensus.

Homer_Simpson · 07-29-2010, 12:03 PM

Could you give like a ballpark figure for how much a complete set of connectors would cost?

I'm assuming that these connectors includes brand new pins?

Also, will you be selling the appropriate crimping tools for said connectors?

onlydrinkkoolaid · 07-29-2010, 12:23 PM

it would trully depend on the pricing and options for conversion harnesses that would get you so business as well

bb4_96 · 07-30-2010, 04:06 AM

I think the average connectoprice could be affordable. You could probably replace all the underhood engine harness plugs for $100 or less. I haven't hatched out pricing yet as it's going to depend on how much I purchase.

raiser · 09-06-2011, 12:16 AM

I know this post is over a year old..... but would really like some of these.

Have problems with brittle tabs on my Skyline harness connectors - so would be interested in connectors too - if the price was right.

..... or if you have decided not to sell these details of suppliers would be useful.

bb4_96 · 10-18-2011, 09:21 PM

still in talks with a guy who is in a better position than I to acquire these in terms of moqs. Any connectors in particular?

nytro2413 · 11-02-2011, 08:18 PM

im interested in replacing a bunch of broken connectors on my ka any more info on them?

badboy6686 · 11-02-2011, 08:45 PM

I'm very interested in this, but for VH45DE connectors.

07-29-2010, 06:29 AM	#1
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	Wiring harness replacement connectors My weeks of being a persistent pita for several companies around the world have brought me to a point now where I can start offering some of my findings. If you've read any of my posts I've been hunting for factory nissan connectors for a while. I've made a couple good strides into the market now and am poised to start making purchases. So my question is this. Until I ramp up my efforts into full on made to order/custom tailored harnesses, is there a market for BNIB factory replacement connectors? No more busted tabs, mangled/melted housings, loose contacts. An opportunity to repin and relengthen your harness without soldering. If theres enough interest I'll start stocking to sell soon. If not I can hold off till I find sources for the rest of my operation. Also I can provide a used version of just about any connector on most cars, don't know if that's useful either. I'm hoping i can provide full range of components from used to new and new/used eg used good housing with some new terminals. Let me know what is the consensus.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-29-2010, 12:03 PM	#2
Homer_Simpson Zilvia Addict Join Date: Jun 2008 Location: Back in the Bay! Posts: 619 Trader Rating: (11) Feedback Score: 11 reviews	Could you give like a ballpark figure for how much a complete set of connectors would cost? I'm assuming that these connectors includes brand new pins? Also, will you be selling the appropriate crimping tools for said connectors?

07-29-2010, 12:23 PM	#3
onlydrinkkoolaid Zilvia Member Join Date: Dec 2009 Location: Gainesville,FL Age: 36 Posts: 204 Trader Rating: (1) Feedback Score: 1 reviews	it would trully depend on the pricing and options for conversion harnesses that would get you so business as well

07-30-2010, 04:06 AM	#4
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	I think the average connectoprice could be affordable. You could probably replace all the underhood engine harness plugs for $100 or less. I haven't hatched out pricing yet as it's going to depend on how much I purchase.

09-06-2011, 12:16 AM	#5
raiser Join Date: Sep 2011 Location: uk Age: 62 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	I know this post is over a year old..... but would really like some of these. Have problems with brittle tabs on my Skyline harness connectors - so would be interested in connectors too - if the price was right. ..... or if you have decided not to sell these details of suppliers would be useful.

10-18-2011, 09:21 PM	#6
bb4_96 Zilvia Addict Join Date: Jan 2006 Location: Under my car Posts: 785 Trader Rating: (4) Feedback Score: 4 reviews	still in talks with a guy who is in a better position than I to acquire these in terms of moqs. Any connectors in particular?

11-02-2011, 08:18 PM	#7
nytro2413 Join Date: Jun 2011 Location: flordia Age: 44 Posts: 11 Trader Rating: (1) Feedback Score: 1 reviews	im interested in replacing a bunch of broken connectors on my ka any more info on them?

11-02-2011, 08:45 PM	#8
badboy6686 Zilvia Member Join Date: Jan 2003 Location: Ga Age: 38 Posts: 246 Trader Rating: (5) Feedback Score: 5 reviews	I'm very interested in this, but for VH45DE connectors.