offset question: what does "H" means? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

silvia14 · 06-02-2003, 11:57 PM

so I'm looking for the correct offsets of Blitz Z2 for my '98 S14. I went to this site and for the 18" Z2 they have the following offsets:

18 X 8 5X114.3 (+32, +41H, +45, )
18 X 9 5X114.3 (22H, +32, +38, +41H, +45 )

i'm guessing 18X9 all around with +22mm offset and 235f / 245r tires will probably fit my S14 with big brakes and coilovers. (seeing Nitekid's car has 17X9 +15 all around fits nicely) True?

And what does the letter "H" means beside the offset numbers? (ie +41H in above)?

Thanks

NiteKids · 06-03-2003, 12:13 AM

17x9 plus 15 offset isnt' something where if you don't know what you are doing that I would jump into. Not saying I'm an expert but this setup is not for everybody. Also running a 9inch up front honestly isn't too practical at all. Most people don't do this either. Of course you can do what you want but I am wanrning you what you are getting yourself into. Streched tire, camber, roll fenders, clearing coilovers, brakes etc. lots of put in consideration.

silvia14 · 06-03-2003, 12:36 AM

NiteKids what tires and cambers are you running? do you have coils or shocks+springs?

ok what about:

18X8 +32 with 225 Front with 3mm spacers
and
18X9 +32 with 245 Rear

with -2 Cambers all around?

would that be good for coils and big brakes?

Also can somebody answer the "H" question for me?

Thanks

theronin · 06-03-2003, 12:55 AM

Quote:

Originally posted by silvia14
NiteKids what tires and cambers are you running? do you have coils or shocks+springs?

ok what about:

18X8 +32 with 225 Front with 3mm spacers
and
18X9 +32 with 245 Rear

with -2 Cambers all around?

would that be good for coils and big brakes?

Also can somebody answer the "H" question for me?

Thanks

Homie... to clear brakes it all depends on the spoke design! why dont you look for offsets lower than +30? come on... you know you want to!

silvia14 · 06-03-2003, 01:10 AM

Quote:

Originally posted by theronin
Homie... to clear brakes it all depends on the spoke design! why dont you look for offsets lower than +30? come on... you know you want to!

you mean the front? now i want to try 18X8 +32 with 5mm spacers up front. is it safe?

someone please tell me what's H!!!

theronin · 06-03-2003, 01:14 AM

Quote:

Originally posted by silvia14
you mean the front? i want to try +32 with 5mm spacers up front. is it safe?

Safe? As in will your wheel pop off or something? or as in clearing coilovers?! be specific please

NiteKids · 06-03-2003, 01:20 AM

I could answer your question but I think all I'm going to say is:

PENIS!

:hammer:

silvia14 · 06-03-2003, 01:39 AM

Quote:

Originally posted by theronin
Safe? As in will your wheel pop off or something? or as in clearing coilovers?! be specific please

in both ways.

Front: 18X8 +32 with 5mm spacers from H&R

theronin · 06-03-2003, 01:42 AM

what kinda coilovers? iirc some have better clearance than others!

Dousan_PG · 06-03-2003, 08:46 AM

go 18x9 +32 all around

that's all im saying.

adey · 06-03-2003, 08:51 AM

Quote:

Originally posted by dousan36
go 18x9 +32 all around

and don't run tires wider than about 235/40(35?)/18 if you haven't rolled your fenders. =)

AKADriver · 06-03-2003, 09:32 AM

To answer the original question, many 3pc. wheels will come in different spoke/face designs. One design will curve the spokes back for a deeper dish look; the other design will curve the spokes forward for brake clearance (Z32 or aftermarket calipers). I'm not wure which design the 'H' refers to.

nrcooled · 06-03-2003, 10:01 AM

If you look on takakaira.com the volks come in different faces (like AKA was saying. High Med and Low dish types. That maybe it but I don't know specificly

**West** · 06-03-2003, 11:09 AM

Quote:

Originally posted by AKADriver
To answer the original question, many 3pc. wheels will come in different spoke/face designs. One design will curve the spokes back for a deeper dish look; the other design will curve the spokes forward for brake clearance (Z32 or aftermarket calipers). I'm not wure which design the 'H' refers to.

Correct.

Typically it stand for a High Disc, IIRC. I got this on my Work Meister S2R's when I had Brembo 13.1" Brakes up front.

silvia14 · 06-03-2003, 04:56 PM

Quote:

Originally posted by dousan36
go 18x9 +32 all around

that's all im saying.

what kind of camber do i need for that setup?

Quote:

what kinda coilovers? iirc some have better clearance than others!

JIC FLT-A2

Thanks for explaining the "H" thing guys.

Dousan_PG · 06-03-2003, 05:01 PM

no more then -2.5 probably closer to -2
run a 225 or 235 tire max
90% sure it should be a 225

r33 gtr wheels are 17x9 +30 (r34 are 18x9 +30)
so your getting +2 mm of extra clearance

if it still rubs (probably wont) then just add a 3 or so mm spacer
you'll be fine

but dont take my word on it! im 90% sure on this. i personally would go w/ the 18x9 +32 ...actually i would get the +22 but that's me...heh..

also get your fenders rolled for more clearance.

sileightymania has 17x9 +22 and a tad shy of -3 degrees w/ HKS hypermax coilovesr..fits and looks great

dorifto 180sx had r33 gtr 17x9 +30 wheels FLTa2s on 215/45 and w/ a 5mm spacer to clear the shock.

all coilovers (brands) differ. if anything youll need a SMALL spacer, but if your S14 you might need nothing..

peace

06-02-2003, 11:57 PM	#1
silvia14 Zilvia Member Join Date: Feb 2002 Posts: 217 Trader Rating: (0) Feedback Score: 0 reviews	offset question: what does "H" means? so I'm looking for the correct offsets of Blitz Z2 for my '98 S14. I went to this site and for the 18" Z2 they have the following offsets: 18 X 8 5X114.3 (+32, +41H, +45, ) 18 X 9 5X114.3 (22H, +32, +38, +41H, +45 ) i'm guessing 18X9 all around with +22mm offset and 235f / 245r tires will probably fit my S14 with big brakes and coilovers. (seeing Nitekid's car has 17X9 +15 all around fits nicely) True? And what does the letter "H" means beside the offset numbers? (ie +41H in above)? Thanks

06-03-2003, 12:13 AM	#2
NiteKids BANNED Join Date: Feb 2002 Location: Socal Posts: 1,223 Trader Rating: (0) Feedback Score: 0 reviews	17x9 plus 15 offset isnt' something where if you don't know what you are doing that I would jump into. Not saying I'm an expert but this setup is not for everybody. Also running a 9inch up front honestly isn't too practical at all. Most people don't do this either. Of course you can do what you want but I am wanrning you what you are getting yourself into. Streched tire, camber, roll fenders, clearing coilovers, brakes etc. lots of put in consideration. Last edited by NiteKids; 06-03-2003 at 12:16 AM..

06-03-2003, 08:46 AM	#10
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	go 18x9 +32 all around that's all im saying. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

06-03-2003, 10:01 AM	#13
nrcooled Nissanaholic! Join Date: Mar 2002 Location: Turn 8 'bout to get rolled by a SC'd ITR Age: 46 Posts: 1,849 Trader Rating: (0) Feedback Score: 0 reviews	If you look on takakaira.com the volks come in different faces (like AKA was saying. High Med and Low dish types. That maybe it but I don't know specificly __________________ '91 hatch w/ SR Sold; '03 Evo Sold 401 HP; '03 MS Protege sold; '00 Evo 6.5 TME Sold 300HP

06-03-2003, 05:01 PM	#16
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	no more then -2.5 probably closer to -2 run a 225 or 235 tire max 90% sure it should be a 225 r33 gtr wheels are 17x9 +30 (r34 are 18x9 +30) so your getting +2 mm of extra clearance if it still rubs (probably wont) then just add a 3 or so mm spacer you'll be fine but dont take my word on it! im 90% sure on this. i personally would go w/ the 18x9 +32 ...actually i would get the +22 but that's me...heh.. also get your fenders rolled for more clearance. sileightymania has 17x9 +22 and a tad shy of -3 degrees w/ HKS hypermax coilovesr..fits and looks great dorifto 180sx had r33 gtr 17x9 +30 wheels FLTa2s on 215/45 and w/ a 5mm spacer to clear the shock. all coilovers (brands) differ. if anything youll need a SMALL spacer, but if your S14 you might need nothing.. peace __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

06-03-2003, 12:36 AM	#3
silvia14 Zilvia Member Join Date: Feb 2002 Posts: 217 Trader Rating: (0) Feedback Score: 0 reviews	NiteKids what tires and cambers are you running? do you have coils or shocks+springs? ok what about: 18X8 +32 with 225 Front with 3mm spacers and 18X9 +32 with 245 Rear with -2 Cambers all around? would that be good for coils and big brakes? Also can somebody answer the "H" question for me? Thanks

06-03-2003, 01:20 AM	#7
NiteKids BANNED Join Date: Feb 2002 Location: Socal Posts: 1,223 Trader Rating: (0) Feedback Score: 0 reviews	I could answer your question but I think all I'm going to say is: PENIS! :hammer:

06-03-2003, 09:32 AM	#12
AKADriver Post Whore! Join Date: May 2002 Location: Springfield, VA Age: 43 Posts: 3,517 Trader Rating: (1) Feedback Score: 1 reviews	To answer the original question, many 3pc. wheels will come in different spoke/face designs. One design will curve the spokes back for a deeper dish look; the other design will curve the spokes forward for brake clearance (Z32 or aftermarket calipers). I'm not wure which design the 'H' refers to.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode