CA Brand new set of Drift Freaq custom urethane KA/SR engine mounts. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift freaq · 02-27-2010, 12:58 PM

This is a brand new set high durometer Polyurethane engine mounts $120 is the price.
I used to sell these all the time in a group buy here many people have run or run them.

They do not have solid rods all the way through so they do not transfer vibration. They are made from high durometer Urethane.
Not Polyurethane tubes or Industrial urethane window caulk you buy at Home Depot.
The mounts are track tested and have been used on many race cars. (THIS SET IS NEW) I am talking about these mounts in General. Oh and I actually have two sets.

They are stiffer than Nismo mounts, but not bone jarring, in fact they are quite nice.

Oh and if you are going to use these on a turbo car? I suggest strongly you keep your exhaust side stock heatshield and use it with these.

I do have a brand new Nismo trans mount to go with these. $45 if you buy the mounts. so the total would be $170 shipped.

drift freaq · 02-28-2010, 04:09 PM

up to the top

drift freaq · 03-02-2010, 12:01 PM

one more me

Harris · 03-02-2010, 12:06 PM

Interested. I will be sending you a pm shortly.

Z33dori · 03-02-2010, 12:11 PM

are these raising mounts? j/w since u said u should still use the heat shield.

drift freaq · 03-02-2010, 01:15 PM

Quote:

Originally Posted by Z33dori

are these raising mounts? j/w since u said u should still use the heat shield.

??? I am not sure exactly what you are asking. Though I think you mean will these raise or lower the engine. Actually they do lower your engine about 1/2 inch or so below where Nismo mounts set your engine.

I recommend heat shields because its wise. It is what the manufacture does, especially in a turbo setup where there is excessive heat.

Dman II-40 · 03-02-2010, 09:33 PM

I been thinking about these mounts for awhile. I figure I'll buy them, PM sent

jdm2191 · 03-02-2010, 10:44 PM

Would you happen to have a tranny mount?

drift freaq · 03-03-2010, 01:35 PM

Quote:

Originally Posted by jdm2191

Would you happen to have a tranny mount?

I do not have a tranny mount designed at this time. I would have to have a lot of interest to warrant going there. Hence why I sell Nismo trans mounts with the setup for a good deal.

02-27-2010, 12:58 PM	#1
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	Brand new set of Drift Freaq custom urethane KA/SR engine mounts. This is a brand new set high durometer Polyurethane engine mounts $120 is the price. I used to sell these all the time in a group buy here many people have run or run them. They do not have solid rods all the way through so they do not transfer vibration. They are made from high durometer Urethane. Not Polyurethane tubes or Industrial urethane window caulk you buy at Home Depot. The mounts are track tested and have been used on many race cars. (THIS SET IS NEW) I am talking about these mounts in General. Oh and I actually have two sets. They are stiffer than Nismo mounts, but not bone jarring, in fact they are quite nice. Oh and if you are going to use these on a turbo car? I suggest strongly you keep your exhaust side stock heatshield and use it with these. I do have a brand new Nismo trans mount to go with these. $45 if you buy the mounts. so the total would be $170 shipped. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

02-28-2010, 04:09 PM	#2
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	up to the top __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

03-02-2010, 12:01 PM	#3
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	one more me __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

03-02-2010, 12:11 PM	#5
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 36 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	are these raising mounts? j/w since u said u should still use the heat shield. __________________

03-02-2010, 10:44 PM	#8
jdm2191 Post Whore! Join Date: Dec 2008 Location: Whittier Age: 34 Posts: 3,717 Trader Rating: (79) Feedback Score: 79 reviews	Would you happen to have a tranny mount? __________________ My Build: The "Coupe De Ville" 1JZ Build!!

03-02-2010, 12:06 PM	#4
Harris Leaky Injector Join Date: Jun 2005 Location: Fort Riley, KS Age: 44 Posts: 77 Trader Rating: (2) Feedback Score: 2 reviews	Interested. I will be sending you a pm shortly.

03-02-2010, 09:33 PM	#7
Dman II-40 Leaky Injector Join Date: Jan 2007 Location: Bend, OR Posts: 140 Trader Rating: (6) Feedback Score: 6 reviews	I been thinking about these mounts for awhile. I figure I'll buy them, PM sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode