hey Zilvia!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Yo-jAn · 05-31-2010, 08:15 PM

Hey guys & girls....
well i did not find a noob introduction thread so here its.
i have been looking around on Zilvia for a long time and finally decided to joint and let every one in on what i have been working on.

I have own 3 s13, 2 hatches and my last one a coupe.
i bought my coupe in 07 so is been 3 years now, and it has gone through major things.
it came with a single cam, then did a dual cam turbo setup for a while sold it and went rb20, did not even install the motor before i bought a r33 front clip..
here is the story with some pics, lmk what you guys think :biggrin:

when i first bought the coupe back in 07

doing some drifting at OSW with the single cam

coils, catback, front lip

got some meshies

swap out the single cam did a simple t28 kat dual cam setup

ran some corn gas (E85) that stuff works amazing!!

bought 5lugs

interior before rhd

decided to sell the kat setup and buy a r32 (rb20det) front clip

So i got all the rhd things from the r32 clip Dash chassis harness firewall pedals, and did a rhd conv

r32 A/C box fits with no problem

then while getting rhd thing done and engine bay painted, i decided to sell the rb20 swap and buy an r33 from clip with an r25det in it

rhd 90% done

cleared the engine bay and motor is in waiting on drive shaft isis intake manifold and fmic to get this rolling

painted the xmember and lower control arm gold

thats it for now, waiting on the N1 water pump, drive shaft isis intake mani, and fmic. will have more pics and vid of first start up soon

wannabdr1ftr · 05-31-2010, 08:17 PM

your car sure came a long ways

SmokeCircle · 05-31-2010, 08:30 PM

there is an intro thread, so i thought this would be another lame noob introduction. This shit is good though. keep it up!

***enkei2k*** · 05-31-2010, 08:35 PM

http://zilvia.net/f/chat/96924-if-yo...-pictures.html

it was stickied on top of the Chat section? the same section you started this thread.

Yo-jAn · 05-31-2010, 08:49 PM

oh snap sorry. can it be moved then...

**ThatGuy** · 06-01-2010, 07:17 AM

Intro Thread and Picture Thread.

They are both Stickied so that they are HARD to miss.

*racerx2k1* · 06-01-2010, 09:34 AM

Um, no you are not new here.

http://zilvia.net/f/members/jdm_drifter.html

Same pics here
http://zilvia.net/f/chat/153667-pic-...ml#post3340707

05-31-2010, 08:15 PM	#1
Yo-jAn BANNED Join Date: Apr 2010 Location: FL Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	hey Zilvia!!! Hey guys & girls.... well i did not find a noob introduction thread so here its. i have been looking around on Zilvia for a long time and finally decided to joint and let every one in on what i have been working on. I have own 3 s13, 2 hatches and my last one a coupe. i bought my coupe in 07 so is been 3 years now, and it has gone through major things. it came with a single cam, then did a dual cam turbo setup for a while sold it and went rb20, did not even install the motor before i bought a r33 front clip.. here is the story with some pics, lmk what you guys think :biggrin: when i first bought the coupe back in 07 doing some drifting at OSW with the single cam coils, catback, front lip got some meshies swap out the single cam did a simple t28 kat dual cam setup ran some corn gas (E85) that stuff works amazing!! bought 5lugs interior before rhd decided to sell the kat setup and buy a r32 (rb20det) front clip So i got all the rhd things from the r32 clip Dash chassis harness firewall pedals, and did a rhd conv r32 A/C box fits with no problem then while getting rhd thing done and engine bay painted, i decided to sell the rb20 swap and buy an r33 from clip with an r25det in it rhd 90% done cleared the engine bay and motor is in waiting on drive shaft isis intake manifold and fmic to get this rolling painted the xmember and lower control arm gold thats it for now, waiting on the N1 water pump, drive shaft isis intake mani, and fmic. will have more pics and vid of first start up soon

05-31-2010, 08:17 PM	#2
wannabdr1ftr Zilvia Junkie Join Date: Jan 2009 Location: TX Age: 38 Posts: 551 Trader Rating: (0) Feedback Score: 0 reviews	your car sure came a long ways __________________

05-31-2010, 08:35 PM	#4
*enkei2k* Super Moderator Join Date: Jul 2007 Location: over the river and through the woods Age: 40 Posts: 7,160 Trader Rating: (29) Feedback Score: 29 reviews	http://zilvia.net/f/chat/96924-if-yo...-pictures.html it was stickied on top of the Chat section? the same section you started this thread. __________________ Ask enkei2k xquizitditz

06-01-2010, 07:17 AM	#6
ThatGuy Admin Asshole Join Date: Mar 2002 Location: Retired Age: 45 Posts: 20,394 Trader Rating: (0) Rides Gallery: ThatGuy Feedback Score: 0 reviews	Intro Thread and Picture Thread. They are both Stickied so that they are HARD to miss. __________________ "Speak softly,..." -Pres. Teddy Roosevelt "Be polite, be professional, ..." -Gen. James Mattis

06-01-2010, 09:34 AM	#7
racerx2k1 460 Join Date: Jan 2004 Location: Nowhere Posts: 17,704 Trader Rating: (0) Feedback Score: 0 reviews	Um, no you are not new here. http://zilvia.net/f/members/jdm_drifter.html Same pics here http://zilvia.net/f/chat/153667-pic-...ml#post3340707 __________________

05-31-2010, 08:30 PM	#3
SmokeCircle Zilvia Junkie Join Date: Mar 2008 Location: Arlington, VA Posts: 313 Trader Rating: (4) Feedback Score: 4 reviews	there is an intro thread, so i thought this would be another lame noob introduction. This shit is good though. keep it up!

05-31-2010, 08:49 PM	#5
Yo-jAn BANNED Join Date: Apr 2010 Location: FL Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	oh snap sorry. can it be moved then...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode