CA Bronze Enkei NT03+M's, 17x9.5 +38 5x114.3

[racepar1]

I have a full set of 17" X 9.5", +38 offset, 5x114.3, Enkei NT03+M's. There is little to no rash (on the raw wheels pre-powdercoat) whatsoever on these things, they're very clean.

The wheels are freshly powdercoated bronze and the centercaps (all 4 included) are freshly powdercoated flat black. The powdercoat isn't quite perfect, it has some very minor flaws, but it looks very good. NONE of the imperfections that I noticed are visible in any of the pics. You would have to see the wheels in person and inspect them very closely to notice anything. I'm kind of a perfectionist... The wheels are kinda dusty in the pics and they do not do the bronze any justice at all. It's way deeper, darker, and sexier in person.

Due to a malfunction on the tire machine two of the wheels are scratched on the very top of the outer lip, this is barely noticeable with the tires mounted however as it is under the bead protector.

NO TIRES are included with the wheels. The tires in the pictures are 245/45/17 and are only pictured for fitment comparison at this point. I was actually surprised how well they fit. I figured that a +38 would be way sunken, but that's not the case. Fitment on a stock body s13 (rolled fenders) is TITS with 275/40/17's, which I have on the car currently as rollers (not pictured). With the 245's in the pics a 5-10mm spacer is all you would need.

$800 FIRM

WHEEL 1



WHEEL 2



WHEEL 3



WHEEL 4



ON-CAR



FRONT FITMENT W/15MM SPACERS TO CLEAR COILOVERS (other newer coils will need less spacing to clear)



REAR FITMENT W/5MM SPACERS


With 275/40/17's

[racepar1]

First bump........