![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Junkie
![]() |
![]() Hey guys, building a new car and considering doing a different motor for the 2011 fd season. The motor is tuned from blacktrax and makes 430hp and 360tq tuned at 21psi on racegas
![]() The motor has only one fd season on it. It makes tons of power and the whole season I havn't had any problems with it. I change the oil and the plugs before every event. Before every event it was back on the dyno at blacktrax to have the tune freshened up. Tune is spot on. The motor is very snappy and sharp. The motor is in my car right now and is on the way back from panama, the second it gets back I am pulling the motor. Specs of the motor: head- BC 272 cams BC valves, springs, retainers, with new seals Circuit sports rocker arm stoppers 3angle valve job decked head Apexi 1.1 head gasket Block- JE forged pistions (.020 over) Eagle H beam forged rods polished crank acl race main and rod bearings new oem front and rear main seal ARP chromolly studs Freddy oil pan Turbo setup- Garrett gt3071R twin scroll .72 Full Race twin scroll manifold V-BAND Full Race dump pipeV-BAND Tial 44mm external wastegate V-BAND wastegate "screamer" pipe V-BAND Blitz dual sbc boost controller (tuned for different boost settings) All AN lines 4"intake included wit k&n filter Tuned with- Apexi power fc d-jetro(no maf) Nismo 740cc injectors Nismo FPR fuel pressure gauge on motor Other stuff- The valve cover has been drilled out and another fitting has been welded in for crank case vent through the valve cover. Done for no more blow by into catch can. It works amazing, motor makes very very little blow by into can. Custom catch can with AN fittings/ss braided line for everything Valve cover powder coated neon Greddy RS bov Mid mount intercooler setup. KOYO rad GREX oil filter relocation Act 6puck unsprung clutch and heavy duty pressure plate Comes with all accessories Power steering line is AN/ss and can be included if you need it. Im sure im missing stuff, if you have any questions feel free to call or text any time 408 802-7670 -matt Asking $7000 OBO when the car gets back I will have more pics of the turbo and other stuff. this is all I have of now. vid of the car at dyno: YouTube - BlackTrax the Matt Field Project_.wmv ![]() ![]() ![]()
__________________
My Feedback Last edited by uthemofo; 02-24-2011 at 12:20 AM.. |
![]() |
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|