TX tons of parts for sale, rb26, s13, brake upgrade, coil overs, etc - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RB26 180 · 11-02-2010, 09:23 AM

rb26180 pictures by RB26180 - Photobucket

RB26 cylinder head bare with cam caps. Clearanced for High lift cams, coolant mod performed $500

Z32 ignitor chip, bought new used for a few months $90

Grex 272/280 ll.3mm lift cams pair $450

Tomei rb26 lifters, 2mm oversize for high lift cams, installed, never ran $450

New in plastic Cometic MLS head gasket 88mm bore, $120

Supra 2jzgte stock lifters $180

JIC Rear upper control arms $200

Chromoly trac and toe rods, double adjustable with chromoly fine thread rod ends $140 per pair

6 - 1000cc bosch injectors low impedance $350

Signal Auto Carbon fiber mirrors $250

I also have several parts that never made it on the car like a huge road race Fluidyne oil cooler, a very nice transmission cooler with fan assembly (I was going to run a small pump assembly to cycle the trans fluid through the cooler, keeping trans temps down on track days.

I am sure there are several things I forgot, this was just off the top of my head.

email is best [email protected]

11-02-2010, 09:23 AM	#1
RB26 180 Zilvia Member Join Date: Feb 2005 Location: Dallas Tx Posts: 231 Trader Rating: (2) Feedback Score: 2 reviews	tons of parts for sale, rb26, s13, brake upgrade, coil overs, etc rb26180 pictures by RB26180 - Photobucket RB26 cylinder head bare with cam caps. Clearanced for High lift cams, coolant mod performed $500 Z32 ignitor chip, bought new used for a few months $90 Grex 272/280 ll.3mm lift cams pair $450 Tomei rb26 lifters, 2mm oversize for high lift cams, installed, never ran $450 New in plastic Cometic MLS head gasket 88mm bore, $120 Supra 2jzgte stock lifters $180 JIC Rear upper control arms $200 Chromoly trac and toe rods, double adjustable with chromoly fine thread rod ends $140 per pair 6 - 1000cc bosch injectors low impedance $350 Signal Auto Carbon fiber mirrors $250 I also have several parts that never made it on the car like a huge road race Fluidyne oil cooler, a very nice transmission cooler with fan assembly (I was going to run a small pump assembly to cycle the trans fluid through the cooler, keeping trans temps down on track days. I am sure there are several things I forgot, this was just off the top of my head. email is best [email protected] Last edited by RB26 180; 05-16-2011 at 07:04 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode