NV ka24de custom intake manifold - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

myowncasualty · 06-22-2011, 09:48 AM

Custom Intake manifold. I built this for flow bench testing. It is identical to the one I am running on my car and has gained me 40whp at only 9psi. This flows dramatically different and will require a retune. This does not have provisions for a iacv or egr.

Flanged for q45 throttle body. (holes need to be tapped)
Plate welded on bottom for vacuum ports(needs to be drilled and tapped)
Pcv ports are welded shut

***SOLD***

shot of my engine bay

hard to read overlay of with stock IM and my custom IM (went from 293 to 333 @ same 9psi of boost)

06-22-2011, 09:48 AM	#1
myowncasualty Join Date: Aug 2005 Location: somewhere out west Age: 39 Posts: 47 Trader Rating: (3) Feedback Score: 3 reviews	ka24de custom intake manifold Custom Intake manifold. I built this for flow bench testing. It is identical to the one I am running on my car and has gained me 40whp at only 9psi. This flows dramatically different and will require a retune. This does not have provisions for a iacv or egr. Flanged for q45 throttle body. (holes need to be tapped) Plate welded on bottom for vacuum ports(needs to be drilled and tapped) Pcv ports are welded shut *SOLD* shot of my engine bay hard to read overlay of with stock IM and my custom IM (went from 293 to 333 @ same 9psi of boost) Last edited by myowncasualty; 06-26-2011 at 09:54 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode