|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
|
Thread Tools | Display Modes |
07-10-2011, 04:37 PM
|
#1 |
|
Leaky Injector
Join Date: May 2011
Location: New York
Age: 31
Posts: 80
Trader Rating: (1)
 Feedback Score: 1 reviews
|
Wiring; Wont start... Ground wire???
Alright guys I'm just finishing the auto to manual swap on my 96 s14 but i have a slight problem. I took the manual ECU and manual wiring harness from my brothers 240, and just finished wiring it. The problem is, when i go to turn the key, it doesnt want to turn over (it doesnt make the er er er starting sound)
 I think (hope) this one ground wire? is the source of it. Here are a few pictures...This is the wire... I dont know where it goes to or what it is. Can anybody tell me where it bolts to?   Theres also this wire...  ^^^ this wire runs off the manual harness. There are 3 wires running from it. 1 black/yellow 2 blue/ yellow  Off the auto harness there is the same plug just with 2 wires and a different plug. Do I spice them together? There is... 1 black/yellow 1 blue/yellow  Last and final question... I cant remember what bolts to here  Its not the wire, im sure, because it wont reach. Any help is greatly appreciated! I just want to drive the car already!!!   |
|
|
| Sponsored Links |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode