CA KA24DE Turbo Motor part out - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Silvia240sxxx · 06-24-2011, 02:09 PM

I am parting out this 1995 KA24DE Motor that I was building. The motor had 60K miles on it.

Iron Block has been professionally Hot tanked, Magnafluxed, resurfaced, bored & honed 0.020in over. Please send me offer $$$.

Aluminum Cylinder Head has been vacuum tested, hot tanked & professionally resurfaced. Please send me offer $$$.

*SOLD*4 Brand new, never been used Eagle H-Beam cylinder rods. (rated to 800bhp). They also come with APR bolts. The motor was assembled with these installed, but motor was never run. Price is $300 for all 4.

4 Brand new, never been used 8.8:1 ratio aluminum forged Arias pistons (for forced-induction) The motor was assembled with these installed, but motor was never run. Price is $550.

*SOLD*Brand new ARP Cylinder Head stud and bolts. Also I have the ARP Main stud and bolts. Offer me a price.

Crankshaft rail from this '95 motor with 60K miles. Offer me a price.

Oil Pan that has been hot tanked & sandblasted. Offer me a price.

*SOLD*Crankshaft from this '95 motor with 60K miles. Offer me a price.

Intake & Exhaust Camshafts from the '95 motor with 60K miles. Offer me a price.

I am located in Northridge of southern California. Let me know if you have any questions. I would rather do local pick-up, but if you are really interested, I can ship it out to you at your own charge. Happy looking.

rybo760 · 06-24-2011, 08:02 PM

package deal for everything? was going v8 after my ka-t went out but the prices scared me haha

Edwin562 · 06-24-2011, 09:18 PM

im super interested on the whole package deal.... if not just the block and head.

thank you

Silvia240sxxx · 06-25-2011, 02:45 AM

I will sell the whole package for $1200.

Let me know. Would be able to save on shipping since you seem to be in California.

Silvia240sxxx · 06-25-2011, 11:42 AM

If the package deal is paid for by the end of Sunday, I will let it go for $999.

rybo760 · 06-25-2011, 09:44 PM

I'll get back to you via pm tomorrow!

Edit:I only need longblock,head, and all the arp goodies

Silvia240sxxx · 06-26-2011, 02:49 AM

Quote:

Originally Posted by rybo760

I'll get back to you via pm tomorrow!

Edit:I only need longblock,head, and all the arp goodies

Okay great. I will check the mailbox.

Silvia240sxxx · 06-30-2011, 12:50 PM

Okay, so I will give a short update on where things stand.

Oil Pan is pending sale.

Crankshaft & ARP main studs are pending sale.

Peferabley, the head, block & crankshaft girdle all get sold together as they were all machined together.

doridet · 06-30-2011, 03:28 PM

how much for just the rods, pistons and head studs?

Silvia240sxxx · 07-01-2011, 01:04 AM

Quote:

Originally Posted by doridet

how much for just the rods, pistons and head studs?

These each would add up to $950 for the price i'm selling each for.

I will sell these three for $900

nep · 07-01-2011, 01:50 AM

Wish my student loans were here, I'd swoop this up in a blink

Silvia240sxxx · 07-02-2011, 08:34 AM

Quote:

Originally Posted by nep

Wish my student loans were here, I'd swoop this up in a blink

=) well if you work something out, they are still available!

4-20sx · 07-02-2011, 10:20 AM

Fuk wish u put this up before I bought my vh45!!
This is a fuken steal!!

Silvia240sxxx · 07-12-2011, 07:42 PM

Oil pan has been sold.

Ethan Hunt · 07-12-2011, 09:12 PM

Do you have the valve cover? If so how much?

Silvia240sxxx · 07-15-2011, 01:56 AM

Quote:

Originally Posted by Ethan Hunt

Do you have the valve cover? If so how much?

Now that you mention it, I actually do have a valve cover that is sitting around. It is painted black like the one pictured here:

From what I remember, it has cracks in the paint where the bolts are fastened. I will sell it for for $40.00.

Quote:

Originally Posted by S13ZX

what do u have left?

I still have everything that I haven't stated here as sold. =)

Block
Head
Pisons
Rods
Crank
Crank Girdle
ARP Hardware
Cams

There are a lot of items people are interested, but these are not officially sold.

Quote:

Originally Posted by Prime

If no one has picked up that crank, shipped to 95236?

Heavy items takes a bit to ship. I can sell the crank to you for $45.00 I can send it to you $75 shipped.

Prime · 07-15-2011, 03:25 PM

Quote:

Originally Posted by Silvia240sxxx

Heavy items takes a bit to ship. I can sell the crank to you for $45.00 I can send it to you $75 shipped.

Didn't realize you still had the ARP stuff. PM'ed

S13ZX · 07-13-2011, 01:43 AM

what do u have left?

Prime · 07-13-2011, 03:14 AM

If no one has picked up that crank, shipped to 95236?

MrsFieldsKOUKI · 07-15-2011, 10:52 AM

pm me a price for the block head and girdle pls.. thx

Mitsubayati · 07-15-2011, 02:38 PM

Do you happen to have an s14 intake manifold? One without the butterfly valves. If so, how much shipped to 94579?

Silvia240sxxx · 07-15-2011, 07:50 PM

Quote:

Originally Posted by MrsFieldsKOUKI

pm me a price for the block head and girdle pls.. thx

Price has been PMed.

Quote:

Originally Posted by Mitsubayati

Do you happen to have an S14 valve cover. . .

Nah, sorry.

BlakDrag0n9 · 07-15-2011, 08:29 PM

Did anything sell cause I'm looking into rebuilding my KA and this would just be easier. How much for the whole package atm?

Silvia240sxxx · 07-16-2011, 12:36 AM

Quote:

Originally Posted by BlakDrag0n9

Did anything sell cause I'm looking into rebuilding my KA and this would just be easier. How much for the whole package atm?

Well there are a few guys that have said they are going to buy, but it isn't final cuz I havent received any payment.

I was going to sell everything for $1200. I did sell the oil pan which is a cheap part. I can sell whole package to you for $1150.

ship2236 · 07-15-2011, 08:44 PM

Great starting point for whoever pics this stuff up.

LeaS13Zenki · 07-15-2011, 10:41 PM

Free bump
Might be able to get when my fasfa money comes in =D

sr20sean · 07-16-2011, 01:04 AM

what are you looking to get for your arp headstuds?

Prime · 07-16-2011, 01:43 AM

Quote:

Originally Posted by Prime

Didn't realize you still had the ARP stuff. PM'ed

Payment sent regarding this.

Quote:

Originally Posted by sr20sean

what are you looking to get for your arp headstuds?

Sorry boss.

Mista Lee · 07-16-2011, 01:43 AM

any lower on those rods?
shoot me a pm.
Thanks

Silvia240sxxx · 07-16-2011, 01:54 PM

Quote:

Originally Posted by Mista Lee

any lower on those rods?
shoot me a pm.
Thanks

Shoot me an offer.

06-24-2011, 02:09 PM	#1
Silvia240sxxx Zilvia Member Join Date: May 2005 Location: USA Age: 38 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	KA24DE Turbo Motor part out I am parting out this 1995 KA24DE Motor that I was building. The motor had 60K miles on it. Iron Block has been professionally Hot tanked, Magnafluxed, resurfaced, bored & honed 0.020in over. Please send me offer $$$. Aluminum Cylinder Head has been vacuum tested, hot tanked & professionally resurfaced. Please send me offer $$$. SOLD4 Brand new, never been used Eagle H-Beam cylinder rods. (rated to 800bhp). They also come with APR bolts. The motor was assembled with these installed, but motor was never run. Price is $300 for all 4. 4 Brand new, never been used 8.8:1 ratio aluminum forged Arias pistons (for forced-induction) The motor was assembled with these installed, but motor was never run. Price is $550. SOLDBrand new ARP Cylinder Head stud and bolts. Also I have the ARP Main stud and bolts. Offer me a price. Crankshaft rail from this '95 motor with 60K miles. Offer me a price. Oil Pan that has been hot tanked & sandblasted. Offer me a price. SOLDCrankshaft from this '95 motor with 60K miles. Offer me a price. Intake & Exhaust Camshafts from the '95 motor with 60K miles. Offer me a price. I am located in Northridge of southern California. Let me know if you have any questions. I would rather do local pick-up, but if you are really interested, I can ship it out to you at your own charge. Happy looking. Last edited by Silvia240sxxx; 07-19-2011 at 02:09 AM.. Reason: Update sold items

06-30-2011, 03:28 PM	#9
doridet Zilvia Addict Join Date: Aug 2007 Location: 626 during the week/818 on Sundays Age: 39 Posts: 725 Trader Rating: (4) Feedback Score: 4 reviews	how much for just the rods, pistons and head studs? __________________ www.facebook.com/driftergirl www.suislidegirls.tumblr.com

07-02-2011, 10:20 AM	#13
4-20sx Nissanaholic! Join Date: Dec 2002 Location: los angeles Age: 40 Posts: 2,113 Trader Rating: (50) Feedback Score: 50 reviews	Fuk wish u put this up before I bought my vh45!! This is a fuken steal!! __________________ "get that nacho out of my face"

07-15-2011, 02:38 PM	#21
Mitsubayati Zilvia FREAK! Join Date: Aug 2007 Location: The Dro Posts: 1,424 Trader Rating: (18) Feedback Score: 18 reviews	Do you happen to have an s14 intake manifold? One without the butterfly valves. If so, how much shipped to 94579? __________________

07-15-2011, 08:44 PM	#25
ship2236 Nissanaholic! Join Date: Jul 2008 Location: lancaster ca Age: 39 Posts: 2,126 Trader Rating: (18) Feedback Score: 18 reviews	Great starting point for whoever pics this stuff up. __________________

06-24-2011, 08:02 PM	#2
rybo760 Zilvia Member Join Date: Jan 2010 Location: Oceanside California 92054 Age: 34 Posts: 276 Trader Rating: (14) Feedback Score: 14 reviews	package deal for everything? was going v8 after my ka-t went out but the prices scared me haha

06-24-2011, 09:18 PM	#3
Edwin562 Post Whore! Join Date: Nov 2009 Location: Whittier (562) Age: 35 Posts: 4,721 Trader Rating: (35) Feedback Score: 35 reviews	im super interested on the whole package deal.... if not just the block and head. thank you

06-25-2011, 02:45 AM	#4
Silvia240sxxx Zilvia Member Join Date: May 2005 Location: USA Age: 38 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	I will sell the whole package for $1200. Let me know. Would be able to save on shipping since you seem to be in California.

06-25-2011, 11:42 AM	#5
Silvia240sxxx Zilvia Member Join Date: May 2005 Location: USA Age: 38 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	If the package deal is paid for by the end of Sunday, I will let it go for $999.

06-25-2011, 09:44 PM	#6
rybo760 Zilvia Member Join Date: Jan 2010 Location: Oceanside California 92054 Age: 34 Posts: 276 Trader Rating: (14) Feedback Score: 14 reviews	I'll get back to you via pm tomorrow! Edit:I only need longblock,head, and all the arp goodies

06-30-2011, 12:50 PM	#8
Silvia240sxxx Zilvia Member Join Date: May 2005 Location: USA Age: 38 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	Okay, so I will give a short update on where things stand. Oil Pan is pending sale. Crankshaft & ARP main studs are pending sale. Peferabley, the head, block & crankshaft girdle all get sold together as they were all machined together.

07-01-2011, 01:50 AM	#11
nep Zilvia Junkie Join Date: Jun 2007 Location: Oceanside, CA Posts: 370 Trader Rating: (8) Feedback Score: 8 reviews	Wish my student loans were here, I'd swoop this up in a blink

07-12-2011, 07:42 PM	#14
Silvia240sxxx Zilvia Member Join Date: May 2005 Location: USA Age: 38 Posts: 161 Trader Rating: (5) Feedback Score: 5 reviews	Oil pan has been sold.

07-12-2011, 09:12 PM	#15
Ethan Hunt Zilvia Member Join Date: Dec 2007 Location: Simi Valley, CA Age: 51 Posts: 212 Trader Rating: (13) Feedback Score: 13 reviews	Do you have the valve cover? If so how much?

07-13-2011, 01:43 AM	#18
S13ZX Zilvia Junkie Join Date: Apr 2010 Location: city of angels Age: 34 Posts: 313 Trader Rating: (1) Feedback Score: 1 reviews	what do u have left?

07-13-2011, 03:14 AM	#19
Prime Zilvia Junkie Join Date: Mar 2004 Location: California Age: 40 Posts: 444 Trader Rating: (6) Feedback Score: 6 reviews	If no one has picked up that crank, shipped to 95236?

07-15-2011, 10:52 AM	#20
MrsFieldsKOUKI Zilvia Junkie Join Date: Nov 2010 Location: Palmdale, CA (661) Posts: 307 Trader Rating: (6) Feedback Score: 6 reviews	pm me a price for the block head and girdle pls.. thx

07-15-2011, 08:29 PM	#23
BlakDrag0n9 Leaky Injector Join Date: Mar 2007 Location: Shine State Age: 39 Posts: 99 Trader Rating: (4) Feedback Score: 4 reviews	Did anything sell cause I'm looking into rebuilding my KA and this would just be easier. How much for the whole package atm?

07-15-2011, 10:41 PM	#26
LeaS13Zenki Zilvia Addict Join Date: Aug 2010 Location: LA/OC Age: 32 Posts: 877 Trader Rating: (35) Feedback Score: 35 reviews	Free bump Might be able to get when my fasfa money comes in =D

07-16-2011, 01:43 AM	#29
Mista Lee Zilvia FREAK! Join Date: May 2008 Location: Riverside, CA Age: 33 Posts: 1,003 Trader Rating: (26) Feedback Score: 26 reviews	any lower on those rods? shoot me a pm. Thanks __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode