sr water lines and lines help please - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Volcom887 · 08-09-2011, 11:46 PM

#1 obviously oil line goes to the top of the turbo

#2 coolent return goes to #4?

#3 coolant to the water inlet #5?

#4 coolant out goes to #2?

is this correct and where can i get the lines for this turbo they are stock oil and water lines...... but i want steel braided lines

and is it ok to run the coolant to the neck of the coolant return back to radiator?

UNITEDMASTER · 08-10-2011, 12:07 AM

If you want steel braided lines for the above setup. You need to change the banjo(s) at the turbo to banjo/AN. Then get the metric to AN adaptors for the block side.Now make lines to fitRoute them however you need. DONE

Volcom887 · 08-10-2011, 12:10 AM

Quote:

Originally Posted by UNITEDMASTER

If you want steel braided lines for the above setup. You need to change the banjo(s) at the turbo to banjo/AN. Then get the metric to AN adaptors for the block side.Now make lines to fitRoute them however you need. DONE

the adapters are almost impossible to find.....

the banjo steel braided lines on ebay

will those work like

Turbo Oil Water Line SR20DET S14 S15 Ball Bearing GT28 | eBay

they are like bolt ons?

japslapsilvia · 08-10-2011, 06:42 AM

Quote:

Originally Posted by Volcom887

the adapters are almost impossible to find.....

no they are not, they can be found at most all the big suppliers..summitracing, jeggs, pegasus, anplumbing...etc..

s14unimog · 08-10-2011, 04:30 PM

I've got mine like #2 to #5 and #3 to #4. I don't think the coolant passage has a directional flow. What's up with the "RB" tag?

Volcom887 · 08-10-2011, 08:35 PM

Quote:

Originally Posted by s14unimog

I've got mine like #2 to #5 and #3 to #4. I don't think the coolant passage has a directional flow. What's up with the "RB" tag?

i accidently hit rb

oops lol

hmmm i need to figure the lines out idk what way eerythinggoes like return ect...

s14unimog · 08-11-2011, 11:29 AM

I just told you.... I've had mine like that for years without issue.

Volcom887 · 08-11-2011, 05:43 PM

Quote:

Originally Posted by s14unimog

I just told you.... I've had mine like that for years without issue.

Ok thanks ...I'm gona setup that way

08-11-2011, 11:29 AM	#7
s14unimog Nissanaholic! Join Date: Dec 2003 Location: In a place, near a river, over a lake Age: 38 Posts: 2,415 Trader Rating: (22) Rides Gallery: s14unimog Feedback Score: 22 reviews	I just told you.... I've had mine like that for years without issue. __________________ Fuking ginger bread man stole my wallet... SHIFT*lock_slide to side d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-09-2011, 11:46 PM	#1
Volcom887 Zilvia FREAK! Join Date: Sep 2010 Location: Valencia,Ca Posts: 1,145 Trader Rating: (21) Feedback Score: 21 reviews	sr water lines and lines help please #1 obviously oil line goes to the top of the turbo #2 coolent return goes to #4? #3 coolant to the water inlet #5? #4 coolant out goes to #2? is this correct and where can i get the lines for this turbo they are stock oil and water lines...... but i want steel braided lines and is it ok to run the coolant to the neck of the coolant return back to radiator?

08-10-2011, 12:07 AM	#2
UNITEDMASTER Nissanaholic! Join Date: Apr 2006 Location: Anaheim Posts: 1,626 Trader Rating: (10) Feedback Score: 10 reviews	If you want steel braided lines for the above setup. You need to change the banjo(s) at the turbo to banjo/AN. Then get the metric to AN adaptors for the block side.Now make lines to fitRoute them however you need. DONE __________________ MR JACKSON.

08-10-2011, 04:30 PM	#5
s14unimog Nissanaholic! Join Date: Dec 2003 Location: In a place, near a river, over a lake Age: 38 Posts: 2,415 Trader Rating: (22) Rides Gallery: s14unimog Feedback Score: 22 reviews	I've got mine like #2 to #5 and #3 to #4. I don't think the coolant passage has a directional flow. What's up with the "RB" tag? __________________ Fuking ginger bread man stole my wallet... SHIFTlock_slide to side d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson Last edited by s14unimog; 08-10-2011 at 05:07 PM..*