hks ssqv3 question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

blksylv · 07-31-2011, 04:45 PM

hey i recently picked up a bnib ssqv3 and i noticed it wasnt as loud and i got a lil bit of compressor surge at low amounts of throttle . i decided to take a closer look at it and noticed that the silver ring inside would spin when the bov opens. i was wondering if this was normal for the v3? i havent put a boost leak tester on it but car spools alot faster and builds boost instantly now since replacing my old leaky ssqv. heres a vid showing whats goin on.

‪240sx s14 s13 t28 sr20det hks ssqv3‬&rlm; - YouTube

blksylv · 08-02-2011, 08:27 AM

anyone msglngth?

c-los13 · 08-02-2011, 10:31 PM

i had the same problem w my bov not opening right
at the end it was the bov itself that was messed up
i figured this out by pushing the ring manually with a screw driver and pushing it all the way down, mine didnt go ALL the way down and my friends did so i swapped mine.
no problems after that
try that to see if it goes all the way down
sorry bout the long explanation...im sleepy hahahah

blksylv · 08-09-2011, 12:28 PM

hmm would it be possible to take the ring all the way out or would it not hold boost at all?

BNASTYs13 · 08-10-2011, 09:37 PM

thats weird with a pull type bov. My v1 and v2 would open at any amount of boost. it is probably a faulty bov.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-02-2011, 10:31 PM	#3
c-los13 Zilvia Junkie Join Date: Feb 2010 Location: Edinburg, Texas Age: 36 Posts: 446 Trader Rating: (0) Feedback Score: 0 reviews	i had the same problem w my bov not opening right at the end it was the bov itself that was messed up i figured this out by pushing the ring manually with a screw driver and pushing it all the way down, mine didnt go ALL the way down and my friends did so i swapped mine. no problems after that try that to see if it goes all the way down sorry bout the long explanation...im sleepy hahahah

08-10-2011, 09:37 PM	#5
BNASTYs13 Zilvia Addict Join Date: Jul 2011 Location: NC Age: 37 Posts: 685 Trader Rating: (50) Feedback Score: 50 reviews	thats weird with a pull type bov. My v1 and v2 would open at any amount of boost. it is probably a faulty bov.